Tripp Lite PS7224-20HW Bedienungsanleitung

Lies die bedienungsanleitung für Tripp Lite PS7224-20HW (4 Seiten) kostenlos online; sie gehört zur Kategorie Anbaustein. Dieses Handbuch wurde von 8 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2 Bewertungen. Hast du eine Frage zu Tripp Lite PS7224-20HW oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1111 W. 35th Street

Chicago, IL 60609 USA

(773) 869-1234

www.tripplite.com

TRIPP LITE

POWER STRIPS

(Hardwire Models)

Your Power Strip is designed to provide convenient multiple AC outlets. NOTE: The Power Strip

DOES NOT provide your connected equipment with surge or line noise protection.

MOUNTING

Hardwire Power Strip models feature mounting holes in the back cover for permanent mounting

to a variety of flat surfaces.

1. Remove cover by unfastening screws located on each side of the unit.

2. Mark a straight, horizontal line where you want to mount the Power Strip. Place the

Power Strip along the line, ensuring that the line intersects the center of each mounting

hole.

3. Using screws and other appropriate hardware (user supplied), mount the Power Strip to

the surface.

ELECTRICAL CONNECTION

Connect your Power Strip to a circuit provided with adequate overload protection (either a circuit

breaker or a fuse).

1. Remove knockout on the Power Strip end located closest to desired electrical source.

2. Install 1/2 in (1.3 cm) BX connector.

3. Connect incoming ground wire

to closest ground lug inside the

Power Strip.

4. Connect incoming hot (black)

wire to the Power Strip's internal

hot (black) wire using supplied

wire nut.

5. Connect incoming neutral

(white) wire to the Power Strip's

internal neutral (white) wire using

supplied wire nut.

6. Reinstall Power Strip cover.

EQUIPMENT CONNECTION

Plug your equipment into the Power Strip's AC receptacles. DO NOT plug in equipment that

draws more than the amperage rating of your circuit, or you will either trip your circuit breaker or

blow your fuse. If this occurs, remove overload and reset circuit breaker or replace fuse.

Français : p. 2; Español: p. 3

Step #3

Copyright 2000 Tripp Lite. All rights reserved.

CUS

U

L

Produktspezifikationen