TrueLife Care T3 Bedienungsanleitung

TrueLife Thermometer Care T3

Lies die bedienungsanleitung für TrueLife Care T3 (41 Seiten) kostenlos online; sie gehört zur Kategorie Thermometer. Dieses Handbuch wurde von 38 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 19.5 Bewertungen. Hast du eine Frage zu TrueLife Care T3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/41

CARE T3

EN – INSTRUCTION MANUAL

DE – ANLEITUNG

CS – NÁVOD

SK – NÁVOD

PL – INSTRUKCJA

HU – HASZNÁLATI UTASÍTÁS

SL – NAVODILA

HR – UPUTSTVO

Taking a reading:

1. Clean the tip with a damp cloth.

2. Turn on the thermometer by pressing the .power button

3. Three colours (green/orange/red) will ash in sequence on the thermometer, followed by the last reading

taken, the selected mode (orL / udr / rct / bth), then three dashes ( - - - ) and the measurement icon indica-

ting that the thermometer is now ready for use.

4. Place the thermometer in the chosen place – the dashes on the display will start to move and the measu-

rement icon in the right corner will begin to ash, indicating that the thermometer has successfully

started taking a reading.

5. The thermometer will complete predictive measurement after approx. 5 seconds, emitting an audible signal

(5 beeps for about 5 seconds) and lighting up the display in the corresponding colour. The measurement icon

will also stop ashing. At this point, it is possible to stop but if you want the temperature reading to be as

accurate as possible, follow the points below.

6. Next the thermometer will start the precision measurement phase.

7. Keep the thermometer in place and wait.

8. After a few minutes (depending on the measurement site), a second, longer audible signal will sound

(10 beeps for about 10 seconds) and the measurement icon will disappear.

9. The display will then show the precise measured value.

10. After taking a reading, turn o the thermometer by pressing the . Alternatively, it will switch power button

itself o after 10 minutes to save battery.

COLOURED BACKLIGHT

The thermometer also indicates the measured temperature using the coloured backlight of the display.

Temperature up to 37.2 °C (98.96 °F) – green backlight (normal body temperature)

Temperature from 37.3 to 37.7 °C (from 99.14 to 99.86 °F) – orange backlight (elevated temperature)

Temperature 37.8 °C (100.04 °F) and above – red light (fever) + audible fever alert

SELECTING THE MEASUREMENT MODE

The thermometer allows you to measure the temperature in three places on the body and the temperature of

water. To achieve the most accurate results, set the thermometer‘s measurement mode for the specic site you

are taking the reading from. To select the mode, proceed as follows:

1. Turn on the thermometer by pressing the .power button

2. When the currently selected mode appears on the display, press and hold the for about 3 sepower button -

conds until the display ashes.

3. Now you can toggle between modes, by pressing the .power button

4. After choosing the mode, simply wait until the display stops ashing and the thermometer will display

3 dashes ( - - - ) and the measurement icon indicating the thermometer is ready to take a reading.

5. Take a temperature reading.

orL – Oral mode – for measuring the temperature from the mouth

udr – Underarm mode – for measuring the temperature from the armpit

rct – Rectal mode – for measuring the temperature from the rectum

bth – Bath mode – for measuring water temperature

MEASUREMENTS IN INDIVIDUAL MODES

1. Oral mode

a. Before using the thermometer, do not eat or drink anything

(especially hot and cold food or drinks) and keep your mouth

closed for 3–10 minutes before starting the measurement.

b. Place the thermometer in your mouth under your tongue in one

of the two pockets to the left or right of the root of the tongue.

c. Close your mouth and try to breathe evenly through your nose

during the measurement (so that the reading is not aected by

airow).

Produktspezifikationen

Marke:	TrueLife
Kategorie:	Thermometer
Modell:	Care T3
Wasserfest:	Ja
Breite:	143 mm
Tiefe:	25 mm
Gewicht:	21 g
Produktfarbe:	Green, White
Steuerung:	Tasten
Akku-/Batterietyp:	CR2032
Höhe:	14 mm
Betriebstemperatur:	5 - 40 °C
Display-Hintergrundbeleuchtung:	Ja
Typ:	Kontakt-Thermometer
Automatische Abschaltung:	Ja
Menge pro Packung:	1 Stück(e)
Temperaturbereich bei Lagerung:	-10 - 50 °C
Anzahl unterstützter Akkus/Batterien:	1
Speicherkapazität:	10 Eintragungen
Warnanzeige bei geringem Ladestand:	Ja
Speicherfunktion:	Ja
Maßeinheit:	°C, °F
Genauigkeit:	0.1 °C
Temperaturmessbereich:	32 - 43.9 °C
Position des Thermometers:	Oral, Rectal, Underarm
Messzeit:	10 s
Hochtemperatur-Alarmeinstellung:	Ja
Aufbewahrungsbox:	Ja
Flexible Spitze:	Ja