Ubiquiti Networks EdgeRouter Pro ERPro-8 Bedienungsanleitung
Ubiquiti Networks
Router
EdgeRouter Pro ERPro-8
Lies die bedienungsanleitung für Ubiquiti Networks EdgeRouter Pro ERPro-8 (20 Seiten) kostenlos online; sie gehört zur Kategorie Router. Dieses Handbuch wurde von 41 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 21 Bewertungen. Hast du eine Frage zu Ubiquiti Networks EdgeRouter Pro ERPro-8 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/20
8-Port Router
with 2 Combination
SFP/RJ45 Ports
Model: ERPro-8
Introduction
Thank you for purchasing the Ubiquiti Networks®
EdgeRouter ™PRO, which is part of the EdgeMAX® platform.
Formore information, visit www.ubnt.com/edgemax
This Quick Start Guide is designed to guide you through
installation and show how to access the EdgeOS™
Configuration Interface. This guide also includes the warranty
terms and is for use with the EdgeRouter PRO, modelERPro-8.
Package Contents
EdgeRouter PRO
8-Port Router
with 2 Combination
SFP/RJ45 Ports
Model: ERPro-8
Power Cord Mounting Screws
(#10-32 x 5/8", Qty. 4)
Cage Nuts
(#10-32 x 5/8", Qty. 4)
Quick Start
Guide
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer’s
responsibility to follow local country regulations, including operation within legal frequency
channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.
Hardware Overview
Front Panel Ports
Console RJ45 (eth0-eth7) SFP (eth6-eth7)
USB
Interface Description
Console
RJ45 serial console port for Command
Line Interface (CLI) management. Use an
RJ45-to-DB9, serial console cable, also
known as a rollover cable, to connect the
Console port to your computer. (If your
computer does not have a DB9 port, then
you will also need a DB9 adapter.) Then
configure the following settings as needed:
• Baud rate 115200
• Data bits 8
• NONEParity
• 1Stop bits
• NONEFlow control
USB Reserved for future use.
RJ45
(eth0-eth7)
RJ45 ports support 10/100/1000 Ethernet
connections. RJ45 port eth6 or eth7 is
active only if the corresponding SFP port
is empty.
SFP
(eth6-eth7)
SFP ports are hot-swappable and support
100 Mbps or Gigabit fiber SFP modules. If
an SFP module is plugged in, then the SFP
port is active, and the corresponding RJ45
port is deactivated.
Produktspezifikationen
| Marke: | Ubiquiti Networks |
| Kategorie: | Router |
| Modell: | EdgeRouter Pro ERPro-8 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ubiquiti Networks EdgeRouter Pro ERPro-8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Router Ubiquiti Networks
16 Oktober 2024
4 Oktober 2024
6 September 2024
25 August 2024
25 August 2024
21 August 2024
11 August 2024
6 August 2024
3 August 2024
Bedienungsanleitung Router
- AVPro Edge
- König
- Smart-AVI
- Xantech
- Zoom
- LTS
- Davolink
- Digitus
- Belkin
- TRENDnet
- Siemens
- Sitecom
- Dahua Technology
- Eero
- Thrustmaster
Neueste Bedienungsanleitung für -Kategorien-
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
9 Juni 2025
9 Juni 2025
8 Juni 2025