Ubiquiti Networks ER-4 Bedienungsanleitung


Lies die bedienungsanleitung für Ubiquiti Networks ER-4 (20 Seiten) kostenlos online; sie gehört zur Kategorie Netzwerkkarte / Adapter. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Ubiquiti Networks ER-4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/20
4-Port Gigabit Router
with 1 SFP Port
Model: ER-4
Introduction
Thank you for purchasing the Ubiquiti Networks®
EdgeRouter
. This Quick Start Guide is designed to guide you
through installation and also includes warranty terms.
EdgeRouter ER-4
Wall Mount Screws
(Qty. 2)
Wall Mount Anchors
(Qty. 2)
4-Port Gigabit Router
with 1 SFP Port
Model: ER-4
Power Cord Quick Start Guide
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the professional
installer’s responsibility to follow local country regulations, including operation within legal
frequency channels, output power, indoor cabling requirements, and Dynamic Frequency
Selection (DFS) requirements.
Installation Requirements
For indoor applications, use Category 5 (or above) UTP
cabling approved for indoor use.
For outdoor applications, shielded Category 5 (or above)
cabling should be used for all wired Ethernet connections
and should be grounded through the AC ground of the
power supply.
We recommend that you protect your networks from
harmful outdoor environments and destructive ESD events
with industrial-grade, shielded Ethernet cable from Ubiquiti
Networks. For more details, visit:
www.ubnt.com/toughcable
WARNING: To reduce the risk of fire or electric shock,
do not expose the EdgeRouter to rain or moisture.
Note: Although the cabling can be located outdoors,
the EdgeRouter itself should be housed inside a
protective enclosure.


Produktspezifikationen

Marke: Ubiquiti Networks
Kategorie: Netzwerkkarte / Adapter
Modell: ER-4
Anzahl Prozessorkerne: 4
Prozessortaktfrequenz: 1000 MHz
Breite: 229 mm
Tiefe: 136.5 mm
Gewicht: 795 g
Produktfarbe: Schwarz
Höhe: 31.1 mm
Energiequelle: AC
AC Eingangsspannung: 110 - 240 V
Betriebstemperatur: -10 - 50 °C
Relative Luftfeuchtigkeit in Betrieb: 10 - 90 %
Unterstützte Sicherheitsalgorithmen: IPSEC, SNMP, SSH
Quality of Service (QoS) Support: Ja
Zertifizierung: CE, FCC, IC
Stromverbrauch (Standardbetrieb): 13 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45): 3
Warentarifnummer (HS): 85176990
Ethernet LAN Datentransferraten: 10,100,1000 Mbit/s
LED-Anzeigen: Activity, Link, Speed
Rack-Einbau: Ja
Anzahl der USB-Anschlüsse: 1
USB-Version: 3.2 Gen 1 (3.1 Gen 1)
Interne Speicherkapazität: 4 GB
Web-basiertes Management: Ja
VLAN-Unterstützung: Ja
Management-Protokolle: UNMS, CLI, SNMP, NetFlow, LLDP, NTP
Speicherkapazität: 1024 MB
Interner Speichertyp: DRAM
Ethernet Schnittstellen Typ: Gigabit Ethernet
Ethernet-WAN: Ja
Verkabelungstechnologie: 10/100/1000Base-T(X)
VPN Unterstützung: IPSec Site-to-Site and Remote Access\nOpenVPN Site-to-Site and Remote Access\nPPTP Remote Access\nL2TP Remote Access\nPPTP Client
Firewall: Ja
DHCP-Client: Ja
DHCP-Server: Ja
Reset-Knopf: Ja
Eingebauter Prozessor: Ja
Anzahl serielle Anschlüsse: 1
Transferrate: 4000 Mpps
Systemereignisprotokoll: Ja
Speichermedien: eMMC
Prozessor Architektur: MIPS64
Rack-Kapazität: 1U
Statische Route: Ja
Ethernet/LAN: Ja

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ubiquiti Networks ER-4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten