Uline H-2422 Bedienungsanleitung


Seiten 6 Schrank

Lies die Bedienungsanleitung für Uline H-2422 kostenlos online oder lade das PDF herunter. 7 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage

PAGE 1 OF 6 1224 IH-1748
BLACK WIRE
SHELVING
1-800-295-5510
uline.com
Figure 3
Para en Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
ASSEMBLY
SELF-LEVELING FEET OR CASTER INSTALLATION
Figure 1
Figure 2
SELF-LEVELING FEET
NOTE: If installing casters, do not install self-leveling feet.
1. Ensure post is positioned as shown. (See Figure 1)
2. Insert self-leveling foot into open end of post.
3. Use a rubber mallet/hammer or tap on ground until self-leveling foot slides
into post.
4. Repeat steps 2 and 3 for remaining posts.
CASTERS (ULINE MODEL # H-1205WH SOLD SEPARATELY)
1. Ensure post is positioned as shown. (See Figure 2)
2. Engage the wheel brakes to keep casters from rolling during assembly.
Use a rubber mallet to tap caster stems into posts. (See Figure 2)
1. Start with the lowest shelf. Snap the interlocking pieces of a
shelf support (wide end down) around the post at the lowest
groove where shelf is to be located. Slide the support up or
down until it snaps onto the groove. Add a shelf support to the
same place on the remaining posts. (See Figure 3)
NOTE: NSF requires food service applications to keep the
lowest shelf at least 6" above the floor.
SHELF PARTSPOST PARTS
NOTE: Self-leveling feet are located within
post carton.
Self-Leveling Foot x 4Post x 4
NOTE: Two-shelf wire shelving units include
two shelves and eight sets of shelf supports.
Shelf x 4Shelf Support x 16 Sets
TOOL NEEDED
Rubber Mallet
(optional)

Bewerten Sie dieses Handbuch


Produktspezifikationen

Marke: Uline
Kategorie: Schrank
Modell: H-2422

Brauchst du Hilfe?

Wenn Sie Hilfe mit Uline H-2422 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten