Unitech MS916 Bedienungsanleitung
Unitech
Barcode-Leser
MS916
Lies die bedienungsanleitung für Unitech MS916 (102 Seiten) kostenlos online; sie gehört zur Kategorie Barcode-Leser. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 10 Bewertungen. Hast du eine Frage zu Unitech MS916 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/102

© 2015 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Wireless(BT) Pocket Laser Scanner
- MS916 -
User's Manual
Version 1.0

i
© 2015 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Preface
About This Manual
Thank you for purchasing the unitech product.
This manual explains how to install, operate and maintain our product.
No part of this publication may be reproduced or used in any form, or by any
electrical or mechanical means, such as photocopying, recording, or
information storage and retrieval systems, without permission in writing from
the manufacturer. The material in this manual is subject to change without
notice.
Regulatory Compliance Statements
FCC Warning Statement
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference with radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference with radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.

ii
© 2015 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
1. This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
2. This device complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. To maintain compliance with FCC RF
exposure requirements, avoid direct contact to the transmitting antenna
during transmitting.
3. Any changes or modifications (including the antennas) made to this device
that are not expressly approved by the manufacturer may void the user’s
authority to operate the equipment.
Operation on the 5.15 - 5.25GHz frequency band is restricted to indoor use
only. The FCC requires indoor use for the 5.15-5.25GHz band to reduce the
potential for harmful interference to co-channel Mobile Satellite Systems.
Therefore, it will only transmit on the 5.25-5.35 GHz, 5.47-5.725 GHz and
5.725–5.850 GHz band when associated with an access point (AP).
FCC Label Statement
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
RF Radiation Exposure Statement
For body contact during operation, this device has been tested and meets FCC
RF exposure guidelines when used with an accessory that contains no metal
and that positions the handset a minimum of 1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF exposure
guidelines.
Canadian Compliance Statement
This Class B Digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numerique de la classe B respecte les exigences du Reglement
sur le material broilleur du Canada.
Produktspezifikationen
Marke: | Unitech |
Kategorie: | Barcode-Leser |
Modell: | MS916 |
Bildschirmtechnologie: | OLED |
Bluetooth-Version: | 2.1+EDR |
Akku-/Batteriekapazität: | 680 mAh |
Breite: | 36.9 mm |
Tiefe: | 95.9 mm |
Gewicht: | 63 g |
Produktfarbe: | Weiß |
Internationale Schutzart (IP-Code): | IP42 |
Übertragungstechnik: | Verkabelt & Kabellos |
Akku-/Batterietechnologie: | Lithium-Ion (Li-Ion) |
Höhe: | 21.1 mm |
Energiequelle: | Akku |
Eingebautes Display: | Ja |
Betriebstemperatur: | 0 - 50 °C |
Zertifizierung: | CE, FCC, BSMI, VCCI |
Warentarifnummer (HS): | 84716070 |
Typ: | Tragbares Barcodelesegerät |
Temperaturbereich bei Lagerung: | -30 - 70 °C |
Speicherkapazität: | 16 MB |
Standard-Schnittstellen: | Bluetooth, USB |
Wellenlänge: | 650 nm |
Sensor-Typ: | Laser |
Scanner-Typ: | 1D |
Lesegeschwindigketi (max): | 104 Auslesungen/Sekunde |
2D (Matrix & gestapelte) Barcodes unterstützt: | Nicht unterstützt |
Lineare (1D) Barcodes unterstützt: | Codabar, Code 128A, Code 32, Code 39, Code 93, EAN-13, EAN-8, MSI |
Schlüsselanzahl: | 3 Schlüssel |
Display-Auflösung: | 128 x 64 Pixel |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Unitech MS916 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Barcode-Leser Unitech
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
29 November 2023
11 September 2023
11 September 2023
11 September 2023
11 September 2023
Bedienungsanleitung Barcode-Leser
- Qoltec
- Garmin
- Motorola
- Godex
- Mach Power
- Tecno
- Brady
- Posiflex
- IC Intracom
- Intermec
- Opticon
- Renkforce
- IFM
- Digitus
- Trimble
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
15 Juni 2025
12 Juni 2025
12 Juni 2025
10 Juni 2025
8 Juni 2025
30 November 2024
30 November 2024
6 Oktober 2024