UPM WS290C Weerstation Bedienungsanleitung

Lies die bedienungsanleitung für UPM WS290C Weerstation (6 Seiten) kostenlos online; sie gehört zur Kategorie Wetterstation. Dieses Handbuch wurde von 53 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 27 Bewertungen. Hast du eine Frage zu UPM WS290C Weerstation oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

GETTING STARTEDbutton placement

1

7

6

8

9

10

2

3

4

5

MIN/-/MIN: shows minimum temperature

& humidity; adjusts clock, alarm, date and

temperature alarm values

C/F: changes House Code and Channel Code;

selects °C or °F

SET: activates SET function

Table Stand

Battery Compartment

LCD Screen

ON/OFF: toggles betweenC andF, 12 and

24hourformat,Alarm1&2onandoff,andbar

graph indoor and outdoor selection; scrolls

through temperature alarm settings (off/high/low)

°°

CHN: scrolls through remote channels (1 to 3);

adjusts time and date values

HOUR/+/MAX: shows maximum

temperature & humidity; adjusts clock,

alarm, date and temperature alarm values

SNOOZE/MODE: scrolls through Clock1&2,

Alarm1&2,DateandTemperatureAlarm mode;

snooze for alarm

1

2

3

5

4

6

9

GETTING STARTED

Remove battery cover

Set up the transmitter(s)setting up the receiverbefore

Remove battery cover

2 AA size batteries (included)

2 AA size batteries (included)

setting up transmitter

1

*

1

Temperature and humidity will appear and

on the LCD screenalternate

House code will blink for 8 seconds

2

2

3

3

4

5

6

7

8

9

10

Select House code (1-15) by pressing C/F

Press SET

Press SET

Channel code will blink for 8 seconds

Select Channel code (1-3) by pressing C/F

* If you have multiple transmitters for a single receiver,

set each transmitter to theHouse codesame

* If you have multiple transmitters for a single receiver,

set each transmitter to aChannel codedifferent

Setting the Temperature Alarm for the Local Temperature

Based on theanddata collected from the remote

transmitter (Channel 1), the receiver will display the following weather

icons on the LCD screen.

temperature humidityTheis an ideal feature to be used for greenhouses

and wine cellars, or any place that you require controlled temperature.

Once activated, the temperature alarm would sound when the room gets

too warm or too cold depending on your settings.

temperature alarm

WEATHER ICONS

HISTORICAL TEMPERATURE BAR GRAPH

WS290C + WT440H

Wireless Weather Station

OWNER’S

MANUAL

setting up receiver

WS290C receiver

WT440H transmitter

11

Battery Cover

12

Wall Mount Bracket & Table Stand

%

1

1

1

SET C/F

-

AA 1.5V

+

-

AA 1.5V

+

5

9

1

3

4

7

6

8

10

11

2

Insert batteries into compartment,

observing proper polarity

Insert batteries into compartment,

observing proper polarity; replace cover

Select temperature display inC orF by pressing C/F

°°

Replace battery cover

Congratulations on your purchase of this

weather station set, WS290C + WT440H.

Please take the time to read and

understand this manual so you can begin

to enjoy the convenience and features this

product has to offer.

Main Display Unit WS290C:

* dual clock and dual alarm

* calendar (month/day/date)

* local temperature display

* receives and displays temperature and

humidity readings from up to 3 remote

transmitters via RF technology of 433MHz

* minimum and maximum temperature and

humidity memory

* temperature and humidity trend indicator

* temperature history (bar graph for past

12 hours)

* weather icons

* user-selectableC orF

* table stand or wall mountable

* battery type:2xAA

°°

FEATURES

Remote Transmitter WT440H

* drip-proof design with LCD screen

* temperature display in user-selectable

Cor F

* humidity display

* transmission range: up to 40 metres in

open area

* table stand or wall mountable

* battery type:2xAA

°°

SET C/F

-

AA 1.5V

+

-

AA 1.5V

+

8

7

12

11

11

12

3

1

12

Indoor Bar GraphOutdoor Bar Graph

1

1

10

9

1

2

3

4

2

1

The bar graph lets you see the temperature trend over a period of 12 hours in

3-hour intervals. The left axis denotes the change in temperature in ±2 degrees.

The top axis denotes the time period broken into 3-hour intervals.The reference

point is at (0,0); where the current period is time zero and the change in

temperature is zero.

EXAMPLE: Bar Graph

1

2

3

Howtoreadthebargraph?

About 12 hours agoThe temperature was approximatelydegrees

than the current temperature

4

cooler

About 9 hours agoThe temperature was approximatelydegrees

than the current temperature

2

cooler

About 6 hours ago

Within the last 3 hours

The temperature was approximately the

as the current temperature

same

The temperature was approximatelydegrees

than the current temperature

2

warmer

Selecting Indoor or Outdoor Bar Graph:

You can select to view the indoor or outdoor bar graph.The indoor bar graph is

based on the local temperature and the outdoor bar graph is based on the

remote (outdoor) temperature of Channel 1.

Toggle between the indoor and outdoor bar graph

by pressingin date mode.ON/OFF

If you have selected the indoor bar graph, the INDOOR symbol will appear on

the display.Otherwise, you have selected the outdoor bar graph.

Scroll to Date mode using.MODE

3

2

1

3

4

1

About Freeze Warning:

NOTE:

!

!

!

The SNOW icon will blink to warn of 'freezing'.

Activated when Channel 1's temperature is between -1.9°C and +2.9°C.

The SNOW icon will appear solid if and when Channel 1's temperature

falls below -1.9°C.

!

!

!

When you first set up the weather station set, the weather icon shown on

the display will be CLOUDY.

The weather icon is based solely on the temperature and humidity data

collected from the remote transmitter Channel 1.

If Channel 1’s slot is empty, the weather icon shown on the display will

always be CLOUDY.

SUNNY CLOUDY RAINSNOW FREEZE

WARNING

OR OR

<blinking snow>

TEMPERATURE ALARM

You can set the temperature alarm for the local temperature (main

receiver unit) and/or for one of the remote (outdoor) channels

separately.

UPPER TEMPERATURE LIMIT:warmIf the temperature gets too

and reaches the upper temperature limit, the alarm would sound.

LOWER TEMPERATURE LIMIT:coldIf the temperature gets too

and reaches the lower temperature limit, the alarm would sound.

Scroll to the local temperature alarm setting

mode by pressing.MODE

The Temperature Alarm symbol will appear

and the indoor temperature will be blinking.

Pressorkey to set the desired value for the

temperature limit.

+-

Pressto select the following settings:ON/OFF

UP ARROWUPPER TEMPERATURE LIMIT

LOWER TEMPERATURE LIMIT

TEMPERATURE ALARM DISABLED

DOWN ARROW

BLANK (NO ARROW)

PAGE 1PAGE 2PAGE 3

PAGE 10PAGE 11PAGE 12

2

Produktspezifikationen