V-TAC VT-2025-286 Bedienungsanleitung
V-TAC
Nicht kategorisiert
VT-2025-286
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für V-TAC VT-2025-286 (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 1.5 Benutzern mit durchschnittlich 3.9 Sternen bewertet
Seite 1/3
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
INSTRUCTION MANUAL
220V LED STRIP LIGHT
INTRODUCTION
TECHNICAL DATA
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty does not apply to damage caused by incorrect installation
or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect
removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of
product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
MODEL VT-2835-121 VT-2025-286
SKU 23724 23725 23726 23715
LED COLOR RED BLUE GREE
LENGTH (ROLL) 10M
LUMENS/M 1100LM
POWER/M 10.5W 1
BEAM ANGLE 120°
CHIP TYPE 2835 SMD 202
LED COUNT 120 LEDs/M 286LE
PCB WIDTH 8mm
CURRENT/M 0.044A 0.052A
DP 0.9
CRI ≥80
PROTECTION CLASS Class II
INPUT VOLTAGE AC: 220-240V, 50/60Hz
WORKING TEMPERATURE
-20°C to +40°C
PLUG & PLAY
INSTALLATION DIAGRAM
This marking indicates that this
product should not be disposed
of with other household wastes.
Caution, Risk of electric shock
1
3
5
7
2
4
6
8
WARNING
1. Please make sure to turn o the power before starting the installation.
2. The light source of this luminaire is not replaceable, when the light source reaches its
end of life the whole luminaire should be replaced.
INSTALLATION INSTRUCTIONS
SAFETY INSTRUCTIONS AND WARNINGS
MAINTENANCE REMARKS
SAFETY REMARKS
ATTENTION!
1. Ensure that the power supply is fully disconnected before proceeding with installation or
maintenance.
2. Prior to installation, clean the surface where the light strip will be applied. Remove the
adhesive backing from the light strip and adhere it to the prepared surface.
3. During installation, avoid excessive bending of the light strip. The minimum allowable
bending radius is 50mm.
4. Connect the light strip’s plug (Plug included) to an AC supply.
5. Turn on the power and test the light strip.
• Ensure that the power is turned o before beginning the installation process.
• The LED strip light must not be folded or twisted during installation. Do not turn on
the power until the LED strip light is properly connected and securely installed.
• Do not touch or cut the LED strip light while it is powered on.
• Do not power the LED strip light while it is still in its roll or packaging.
• Avoid installing the LED strip light in wet or flammable environments, and ensure that
the installation area is well-ventilated.
• Do not wrap or cover the LED strip light with any objects.
• Cutting the LED strip light will void its IP rating and compromise its protection
against dust and moisture.
• Cleaning: Use a dry, so cloth for cleaning the LED strip light.
• Power O: Ensure the LED strip light is switched o and the plug is disconnected from the
outlet before cleaning.
• Cooling: Allow the lamp to cool down before cleaning if it has been in use and is still warm.
• Safety: Adhere to general safety precautions during cleaning and exercise caution at all times.
• Child Safety: Keep the product out of reach of children and do not allow it to be used as a toy.
• Damage and Disposal: Do not use the product if it is damaged. It is advisable to recycle it in
accordance with local regulations.
• Intended Use: This product is designed for indirect lighting and architectural applications only.
• Liability: The manufacturer is not responsible for any damage resulting from failure to adhere to
safety instructions or from misuse of the product.
• Only the power chord (supplied with the strip) should be used for installation.
• Do not interrupt or guide the tape with other connectors.
• Cutting or bending the strip will increase the risk of electric shock.
• The strip is powered with 220V AC. Unroll the entire strip before turning on, to
avoid overheating.
Produktspezifikationen
| Marke: | V-TAC |
| Kategorie: | Nicht kategorisiert |
| Modell: | VT-2025-286 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit V-TAC VT-2025-286 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert V-TAC
8 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Nicht kategorisiert Witt
- Nicht kategorisiert Eheim
- Nicht kategorisiert Calor
- Nicht kategorisiert Steinberg
- Nicht kategorisiert Mtx Audio
- Nicht kategorisiert Cybex
- Nicht kategorisiert EOTech
- Nicht kategorisiert Kwikset
- Nicht kategorisiert The Box
- Nicht kategorisiert NAD
- Nicht kategorisiert Bush
- Nicht kategorisiert AVer
- Nicht kategorisiert Venta
- Nicht kategorisiert Vincent
- Nicht kategorisiert Posiflex
Neueste Bedienungsanleitung für -Kategorien-
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025