V-TAC VT-8310 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für V-TAC VT-8310 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 1.5 Benutzern mit durchschnittlich 4.3 Sternen bewertet

Seite 1/8
VT-8310 VT-8340
23783, 23784
23785
23786
23787
8048, 8049, 23788
LUMENS
BODY TYPE
LIFE SPAN
ON/OFF CYCLE
CRI
BEAM ANGLE
INPUT VOLTAGE
OPERATION TEMPERATURE
OPERATING HUMIDITY
PROTECTION RATING
NET WEIGHT
DIMENSIONS
10 W
20 W
D1 (mm)
D2 (mm)
L1 (mm)
1000/1200 Lm
Plastic
>0.7>0.7 >0.9 >0.9
10W
40W
4300/4800 Lm
25,000 Hours
>15,000 Times
>80
120°
IP20
155±5g
VT-8320
2400 Lm
20W
225±5g
24±1 75±1
300±2
566±2
76±1
24±1
40 W
1166±2
76±1
24±1
50 W
1466±2
76±1
24±1
365±5g
VT-8350
8050
8054
50W
6000 Lm
450±5g
INSTRUCTION MANUAL
TECHNICAL DATA
INTRODUCTION & WARRANTY
MODEL
SKU
WATTS
LED PRISMATIC FITTING
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully
before starting the installation and keep this manual handy for future reference. If you have any another query, please contact
our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect
installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect
removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24
Hours a day would void the warranty. This product is warranted for manufacturing defects only.
AC:220~240V, 50Hz
-20°C to +40°C
10%~95%
QUICK
CONNECTOR
SUPER BRIGHT
LM/WATT EFFICIENCY
120
+
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
WARNING
INSTALLATION INSTRUCTIONS
INSTALLATION DIAGRAM
1. Please make sure to turn o the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole
luminaire shall be replaced.
4. For Indoor use only
5. Before installation, you must carefully check the integrity of the product and accessories
6. When installed, products and flammable materials to ensure that at least 0.2m distance, lighting cannot be
installed in the zenith or heat wall, pay attention to low voltage and high voltage electrical wiring separately.
7. To ensure that the power cord has enough length, do not kink cables. Output cables should be laid separately
and at a distance from other cables.
1. Choose the right position, drill two hole and insert the screw (make sure the
distance between the holes is no less than50mm, Less than bracket length)
2. Shrapnel point it at the hole and then install the screws
3. Press the lamp body firmly into the mounting buckle to fix the lamp body,
Slide the lamp body along the mounting buckle to the desired position as
needed.
4. Connect the wiring, use insulating tape, and waterproof tape for insulation
and waterproofing, turn the power ON and test.
This marking indicates that this
product should not be disposed
of with other household wastes.
Caution, risk of electric shock.


Produktspezifikationen

Marke: V-TAC
Kategorie: Nicht kategorisiert
Modell: VT-8310

Brauchst du Hilfe?

Wenn Sie Hilfe mit V-TAC VT-8310 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert V-TAC

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-