Valueline VL-FN12 Bedienungsanleitung
Valueline
Ventilator
VL-FN12
Lies die bedienungsanleitung für Valueline VL-FN12 (36 Seiten) kostenlos online; sie gehört zur Kategorie Ventilator. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 3 Bewertungen. Hast du eine Frage zu Valueline VL-FN12 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/36

2013-12-03
VL-FN09, 12,16
MANUAL (p. 2)
Table fan
ANLEITUNG (S. 4)
Tischventilator
MODE D’EMPLOI (p. 7)
Ventilateur de table
GEBRUIKSAANWIJZING (p. 9)
Tafelventilator
MANUALE (p. 12)
Ventilatore da tavolo
MANUAL DE USO (p. 14)
Ventilador de mesa
HASZNÁLATI ÚTMUTATÓ (o. 17.)
Asztali ventilátor
KÄYTTÖOHJE (s. 19)
Pöytätuuletin
BRUKSANVISNING (s. 22)
Bordsfläkt
NÁVOD K POUŽITÍ (s. 24)
Stolní ventilátor
MANUAL DE UTILIZARE (p. 27)
Ventilator portabil
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 29)
Επιτραπέζιος ανεμιστήρας
BRUGERVEJLEDNING (s. 32)
Bordventilator
VEILEDNING (s. 34)
Bordvifte

2
ENGLISH
Table fan
Figure 1 illustrates the parts of this fan. After removing fan from the package, check to make sure all of the
parts are present.
1. Front grill
2. Fan blade
3. Nut
4. Sleeve (discard)
5. Oscillation knob (on top of motor casing)
6. Latch
7.
Blade cap VL-FN12,VL-FN16
8. Rear grill
9. 3 speed switches
10. Base
11. Retaining Pin
ASSEMBLY
1. Attach the fan base to the fan body using the four screws included.
2. Place the fan base on a firm, stable surface, such as a table or counter top.
3. Remove the plastic sleeve from the shaft.
4. Secure the rear grill to the motor casing with the plastic nut. The handle should be at the top. Turn it
clockwise to tighten.
5. Slide the blade onto the shaft pin, pushing until it is firmly in place.
6. Test the blade operation by rotating it with your hand. There should be no friction with the other parts. If
blade does not rotate freely, repeat steps 4-5.
7.
Place the blade cap on shaft pin and turn counter-clock
wise until tight.VL-FN12,VL-FN16
8. Ensure that the latches on either side of the rear grill are open. Place the front and rear grills together and
close the side latches. If they do not fit securely together, repeat the procedure.
OPERATING INSTRUCTIONS
Place the fan on a safe flat surface where it cannot fall or be pulled by the cord. Plug the fan into a 220V/50Hz
outlet and follow the operating instructions:
This fan is equipped with three fan speeds to allow optimal air comfort.
0- Pressing this button will power the fan OFF.
1- Pressing this button will power the fan ON at a LOW speed setting.
Fig. 1
Produktspezifikationen
Marke: | Valueline |
Kategorie: | Ventilator |
Modell: | VL-FN12 |
Produktfarbe: | Weiß |
Energiequelle: | AC |
Platzierung: | Tisch |
Paketgewicht: | 2060 g |
Gehäusematerial: | Kunststoff |
Größe (Imperial): | 12 " |
Anzahl Geschwindigkeiten: | 3 |
Verpackungsabmessungen (BxTxH): | 190 x 375 x 345 mm |
Auto -Oszillation: | Ja |
Lüfterdurchmesser: | - mm |
Anzahl der Motoren: | 1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Valueline VL-FN12 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Ventilator Valueline
11 Juli 2025
11 Juli 2025
Bedienungsanleitung Ventilator
- Einhell
- Tefal
- Omega Altise
- Jocel
- SMC
- Blumill
- Hikoki
- Air & Me
- Fanco
- Sinbo
- Eligent
- Prime3
- Fantech
- Geek Aire
- ThreeSixty
Neueste Bedienungsanleitung für -Kategorien-
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025