Vango Soul 300 Bedienungsanleitung

Lies die bedienungsanleitung für Vango Soul 300 (1 Seiten) kostenlos online; sie gehört zur Kategorie Zelt. Dieses Handbuch wurde von 49 Personen als hilfreich bewertet. Hast du eine Frage zu Vango Soul 300 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

/ 1 PDF

IF YOU HAVE ANY PROBLEMS PLEASE CONTACT YOUR LOCAL RETAILER or

AMG Group Ltd., Kelburn Business Park, Port Glasgow, Scotland. PA14 6TD.

UK Consumer Hotline: 0844 811 0535 E-Mail: in[email protected]

Calls to our Customer Hotline cost 5p per minute.

Calls from mobile phones, cable networks or public payphones will generally cost more.

Inner First Pitching

1.Assemble poles and lay them parallel on the ground (2

poles 1 long, 1 short) –.

2.Open out inner and position in required direction.

3.Insert the poles through the pole sleeves on the

outside of the inner .

4.Locate one end of each pole on one side of inner into

the metal pin system at the end of the pole sleeves.

Push poles into an arch from opposite ends and locate

pole ends into corresponding metal pin.

5.Peg the rear point of the inner tent.

6.Carefully extend the tent forwards, then peg the two

front corners.

7.Peg both of the poles through the ring of the ring and

pin system (see figure 2).

Flysheet

1.Open out flysheet and position so that the inner

doorway and the flysheet doorway correspond.

2.A number of velcro strips are located on the underside

of the flysheet. These must be secured around the

poles of the inner tent.

3.Peg down each side of flysheet through the shock-cord

pegging points, adjacent to the metal rings of the

inner tent.

4.Pull porch taut, away from main body of tent and peg

down the corners of the porch through the shock-cord

pegging points using pin-pegs.

5.Peg out the rear point of the flysheet.

6.Peg out ALL guy lines using pin-pegs ensuring that guy

line fabric attachment points are evenly tensioned.

Tent Pitching Instructions

Soul

Figure 1

Figure 2

Produktspezifikationen