Vaxcel Hyannis OW37051 Bedienungsanleitung

Vaxcel Nicht kategorisiert Hyannis OW37051

Lies die bedienungsanleitung für Vaxcel Hyannis OW37051 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 6 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 3.5 Bewertungen. Hast du eine Frage zu Vaxcel Hyannis OW37051 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Page 1 / 2
230825
W
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
Hardware Package (included):
Mounting Screw (B) Wire Connector (C)
Bolt Nut (D)
Crossbar Unit (A)
OW37051BBZ / OW37051TB
WARNING: Turn off the main power at circuit breaker before installing fixture.
AVERTISSEMENT: Coupez la source d’alimentation principale au panneau
central de disjoncteurs avant d’installer le luminaire.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read
and save these instructions.
1. Unscrew the two bolt nuts (D), remove the crossbar unit (A)
from the backplate.
2. Attach the crossbar unit (A) to the outlet box by using two mounting screws (B).
Adjust the length of the preinstalled headless screws if necessary.
Note: Make sure that the headless screws are lined up horizontally to
make the fixture level.
Turn off the power at fuse or circuit box
Installation Steps
Rubber Pad (E)
Wire Connector (C)
House Ground Wire
Outlet Box
Mounting Screw (B)
Green Ground Screw
Headless Screw
Crossbar Unit (A)
Fixture Wire
Fixture Ground Wire
Backplate
Bolt Nut (D)
Rubber Pad (E)
Handle
Screwdriver
Max. 60W Medium Base Bulb
(not included)
Bolt Nut
Socket
Frame
Fixture
Set Screw


Produktspezifikationen

Marke: Vaxcel
Kategorie: Nicht kategorisiert
Modell: Hyannis OW37051

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vaxcel Hyannis OW37051 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten