Vaxcel T0638 Bedienungsanleitung


Lies die bedienungsanleitung für Vaxcel T0638 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Vaxcel T0638 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
T0638 / T0759
1. Unscrew the two bolt nuts (D), remove the two rubber pads (E) and the mounting plate unit (A) from the backplate.
2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the
preinstalled headless screws if necessary.
Note: Make sure that two headless screws are lined up horizontally to make the fixture level.
T
W
WARNING: Turn off the main power at circuit breaker before installing fixture.
AVERTISSEMENT: Coupez la source d’alimentation principale au panneau
central de disjoncteurs avant d’installer le luminaire.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read
and save these instructions.
Hardware Package (included):
Mounting Screw (B) Wire Connector (C) Bolt Nut (D) Rubber Pad (E)Mounting Plate Unit (A)
Wire Connector (C)
House Ground Wire
Outlet Box
Mounting Screw (B)
Green Ground Screw
Headless Screw
Mounting Plate Unit (A)
Fixture Wire
Backplate
Rubber Pad (E)
Bolt Nut (D)
Fixture Ground Wire
Max. 60W Type A Bulb
Fixture
(not included)
Turn off the power at fuse or circuit box.
Installation Steps
Page 1 / 2
240312


Produktspezifikationen

Marke: Vaxcel
Kategorie: Nicht kategorisiert
Modell: T0638

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vaxcel T0638 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten