Vaxcel T0689 Bedienungsanleitung


Lies die bedienungsanleitung für Vaxcel T0689 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 9.5 Bewertungen. Hast du eine Frage zu Vaxcel T0689 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/6
221115
Page 1 / 3
Important to Know:
1. If you are not familiar with state and local electrical
codes, it is recommended that you consult with a
qualified electrician.
2. This fixture requires a 120 VAC, 60 Hz power
source.
Maximum Wattage: 2-150 W (bulb not included)
Working Temperature Range: - 13°F ~ 113°F
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
T0689 / T0690 / T0691
Features:
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Note: Fixture can be wall mounted or eave mounted.
Wall Mounted
Eave Mounted
1. Switch Control: turns light ON anf OFF by flicking
the wall switch.
2. Adjust between full brightness and low-level
brightness by toggling the wall switch.
Hardware Package (included):
Decorative cover
Fixture Mounting Screw Rubber Cover
Mounting Strap
Wire Connector
Gasket
Mounting Screw X2
#8/32X1/2 in
Mounting Screw X2
#6/32 X1/2 in
Mounting Screw X2
#10/24 X1/4 in
(1) Phillips-head Screwdriver
1. Phillips-head screwdriver for attaching mounting screws to
mounting strap, mounting bracket and fixture to mounting bracket.
Tools Needed:


Produktspezifikationen

Marke: Vaxcel
Kategorie: Nicht kategorisiert
Modell: T0689

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vaxcel T0689 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten