Vaxcel T0690 Bedienungsanleitung


Lies die bedienungsanleitung für Vaxcel T0690 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 11 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 6 Bewertungen. Hast du eine Frage zu Vaxcel T0690 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/6
221115
Page 1 / 3
Important to Know:
1. If you are not familiar with state and local electrical
codes, it is recommended that you consult with a
qualified electrician.
2. This fixture requires a 120 VAC, 60 Hz power
source.
Maximum Wattage: 2-150 W (bulb not included)
Working Temperature Range: - 13°F ~ 113°F
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
T0689 / T0690 / T0691
Features:
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Note: Fixture can be wall mounted or eave mounted.
Wall Mounted
Eave Mounted
1. Switch Control: turns light ON anf OFF by flicking
the wall switch.
2. Adjust between full brightness and low-level
brightness by toggling the wall switch.
Hardware Package (included):
Decorative cover
Fixture Mounting Screw Rubber Cover
Mounting Strap
Wire Connector
Gasket
Mounting Screw X2
#8/32X1/2 in
Mounting Screw X2
#6/32 X1/2 in
Mounting Screw X2
#10/24 X1/4 in
(1) Phillips-head Screwdriver
1. Phillips-head screwdriver for attaching mounting screws to
mounting strap, mounting bracket and fixture to mounting bracket.
Tools Needed:


Produktspezifikationen

Marke: Vaxcel
Kategorie: Nicht kategorisiert
Modell: T0690

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vaxcel T0690 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten