Velleman K6714-16 Bedienungsanleitung
Velleman
Nicht kategorisiert
K6714-16
Lies die bedienungsanleitung für Velleman K6714-16 (16 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 31 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 16 Bewertungen. Hast du eine Frage zu Velleman K6714-16 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/16
Total solder points: 351
Difficulty level: beginner 1 4 5 2 3 ⌧ advanced
Universal relay card
ILLUSTRATED ASSEMBLY MANUAL H6714(16)IP-1
K6714
K6714
If you want to switch large electric currents
using an electronic control and require control
isola
tion a t
t he same time, then this card is a
valuable asset.
K6714
K6714 -
-16
16
2
Features & specifications
Features :
The relays can be controlled in different ways : direct control from open-
collector outputs, TTL or CMOS level or trough other kits (K6711, K8000,
K8023,…)
Every output of the print can be equipped with a noise suppressor network.
Output 12V CC can be used as a power supply for other kits: K6711,
K8023,...
Specifications
• Power supply:.................................................... 230 or 125VAC max. 12VA.
• Output voltage: ...........................................................................12V/250mA.
• Relay switch-over contact: .................................................max. 5A at 220V.
• PCB dimensions m (5.9" x 8.4") :..................................................150 x 212m
3
Assembly hints
1. Assembly (Skipping this can lead to troubles ! )
Ok, so we have your attent you to make this project ion. These hints will help
successful. Read them carefully.
1.1 Make sure you have the right tools:
• A good quality soldering iron (25-40W) with a
small tip.
• Wipe it often on a wet sponge or cloth, to keep it clean; then apply solder to
the tip, to give it a wet look. This is called ‘thinning’ and will protect
the tip, and enables you to make good connections. When solder
rolls off the tip, it needs cleaning.
• Thin raisin-core solder. Do not use any flux or grease.
• A diagonal cutter to trim excess wires. To avoid injury when cutting
excess leads, hold the lead so they cannot fly towards the eyes.
• Needle nose pliers, for bending leads, or to hold compo-
nents in place.
• Small blade and Phillips screwdrivers. A basic range
is fine.
For some projects, a basic multi-meter is required, or might
be handy
1.2 Assembly Hints :
⇒ Make sure the skill level matches your experience, to avoid disappointments.
⇒ Follow the instructions carefully. Read and understand the entire step before
you perform each operation.
⇒ Perform the assembly in the correct order as stated in this manual
⇒ Position all parts on the PCB (Printed Circuit Board) as shown on the draw-
ings.
⇒ Values on the circuit diagram are subject to changes.
⇒ Values in this assembly guide are correct*
0.000
Produktspezifikationen
| Marke: | Velleman |
| Kategorie: | Nicht kategorisiert |
| Modell: | K6714-16 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Velleman K6714-16 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Velleman
26 Juli 2025
26 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
23 Juni 2025
23 Juni 2025
22 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Gioteck
- Thorens
- Euromaid
- Gustavsberg
- Oromed
- Acme
- Alesis
- Coolaroo
- Novatec
- TVLogic
- Audioengine
- Calligaris .com
- Michael Todd Beauty
- My Arcade
- MaximaVida
Neueste Bedienungsanleitung für -Kategorien-
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025