Vent-A-Hood SLH9230SS Bedienungsanleitung

Lies die bedienungsanleitung für Vent-A-Hood SLH9230SS (2 Seiten) kostenlos online; sie gehört zur Kategorie Dunstabzugshaube. Dieses Handbuch wurde von 35 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 18 Bewertungen. Hast du eine Frage zu Vent-A-Hood SLH9230SS oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Page 1L109 0516A

U

L

CUS

R

Read and Save These Instructions

All Hoods Must Be Installed By A Qualied Installer

INSTALLATION INSTRUCTIONS

UNDER CABINET HOOD

Read All Instructions Thoroughly Before Beginning Installation

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,

OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

A. Installation work and electrical wiring must be done by qualied person(s)

in accordance with all applicable codes and standards, including re-

rated construction. Switch power o󰀨 at service panel and lock the service

disconnecting means to prevent power from being switched on accidentally

during installation.

B. When cutting or drilling into wall or ceiling, do not damage electrical wiring

and other hidden utilities.

C. Ducted fans must always be vented to the outdoors.

D. Su󰀩cient air is needed for proper combustion and exhausting of gases

through the ue (chimney) of fuel burning equipment to prevent back

drafting. Follow the heating equipment manufacturer’s guideline and

safety standards such as those published by the National Fire Protection

Association (NFPA), and the American Society for Heating, Refrigeration

and Air Conditioning Engineers (ASHRAE), and local code authorities.

E. ASHRAE residential ventilation standard 62.2 limits exhaust fans (total) to

a maximum of 15 CFM per 100 square feet of occupiable space, unless a

back drafting test is performed or make-up air is provided. Consult a local

HVAC engineer for make-up air evaluation.

WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL

DUCTWORK

Produktspezifikationen