Vestil JIB-CB-25-10-10 Bedienungsanleitung

Lies die bedienungsanleitung für Vestil JIB-CB-25-10-10 (4 Seiten) kostenlos online; sie gehört zur Kategorie Wasserhahn. Dieses Handbuch wurde von 7 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 4 Bewertungen. Hast du eine Frage zu Vestil JIB-CB-25-10-10 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

09/11/06 JIB-CB, owner’s manual, 28-126-120.doc

V

ESTIL MFG.CO. 1

VESTIL MANUFACTURING CORP.

2999 N. Wayne St., Angola, IN 46703

Ph: 260-665-7586 · Fax: 260-665-1339

E-mail: [email protected] · Website: www.vestil.com

MODEL JIB-CBPORTABLE JIB CRANES

(TO BE INSERTED WITH THE JIB-FM OWNER’S MANUAL)

Serial number ____________

Assembly, Installation, and Operation Instructions ... pg 2 Design and Counterweight Drawings ..................... pgs 3-4

IMPORTANT NOTES,WARNINGS AND SAFETY INSTRUCTIONS

Ensure that all employees understand and follow the following.

*Failure to read and understand this owner’s manual before using or

servicing the portable counterbalanced jib crane constitutes a misuse

of the product. All persons who will install, use, or care for this product

must be familiar with this material.

oThe portable counterbalanced jib crane must not be used for supporting

or transporting personnel.

oThe portable counterbalanced jib crane’s base must be filled with

concrete and must remain on a level, compacted, and improved surface

whenever a load is applied to its boom.

oBefore moving the jib crane, remove any load from it and secure the

boom and hoist against movement during transport.

oAlways watch the suspended load carefully when the jib crane is in

operation.

oThe load must be removed from the horizontal I-beam before any work is

performed on the mast.

oEnsure that all information / safety / warning labels stay in place and

remain legible.

oDo not use the jib crane if any damage or unusual noise is observed.

♦Do not perform any modifications to the portable counterbalanced jib

crane or its concrete base without the manufacturer’s approval. Failure

to receive authorization for changes to the equipment could void the

warranty.

♦Maintenance and repairs are to be done only by personnel qualified to

perform the required work. Consideration will not be given for warranty

repair charges without prior written authorization by the manufacturer.

¬Consult the jib cranes’ owner’s manual for inspection, testing, and

maintenance guidelines.

¬Consult the jib crane’s owner’s manual for safety label and warranty

information.

WHEN ORDERING

REPLACEMENT PARTS:

We take pride in using quality

parts on the equipment we

manufacture. We are not

responsible for equipment

problems resulting from the use

of unapproved replacement

parts.

To order replacement or

spare parts for this equipment,

contact the factory.

In any communication with

the factory please be prepared

to provide the machine’s serial

number, which is indicated on

the machine dataplate.

RECEIVING INSTRUCTIONS

It is possible that this product

could incur damage during

transit.

Inspect the unit closely when

it arrives. If you see evidence

of damage or rough handling to

either the packaging or to the

product when it is being

unloaded, immediately

make a

note of it on the Bill Of Lading!

It is important that you

remove the product’s packaging

upon its arrival to ensure that

there is no concealed damage

or to enable a timely claim with

the carrier for freight damage.

Also verify that the product

and its specifications are as

ordered.

OWNER’S MANUAL

ADDENDUM

Produktspezifikationen