Vevor JN-20FT Bedienungsanleitung


Lies die bedienungsanleitung für Vevor JN-20FT (36 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Vevor JN-20FT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/36
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating.
VEVOR reserves clear interpretation of our user manual. The appearance of the product shall
be subject to the product you received. Please forgive us that we won't inform you again if
there is any technology or software updates on our product.
Door seals set
TOUGH TOOLS, HALF PRICE
030201
Safety instruction and precautions
WARNING:
Read this material before using this product.
Failure to do so can result in serious injury.
1. This product is not a toy. Do not allow children
to play with this item.
2. Use as intended only.
Operation Direction
1. Lay seal on floor in position under door, mark
seal position on floor, and cut the seal to length.
2. The floor should be cleaned with a scrubbing
brush and detergent and left to dry (any contam-
ination on floor will compromiseperformance
of adhesive, i.e oil, grease or wax).
3. Close door with seal underneath it Fig.1, and
position seal as shown on Fig.2. and Fig.3 and
mark the floor for location of seal.
4. Insert the "T-shaped heads" at both ends of
the sealing strip into the two guide grooves of
the aluminum base plate, slowly inserting from
one end of the aluminum base plate to the other
end. If the doors and windows are not equipped
with aluminum bottom guide rails, it is neces-
sary to fix the aluminum bottom guide rails with
screws before installing the sealing strip.
Model: JN-10FT/JN-16FT/JN-20FT/JN-16FT-AL
Sketch map


Produktspezifikationen

Marke: Vevor
Kategorie: Nicht kategorisiert
Modell: JN-20FT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vevor JN-20FT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten