Victron BlueSolar PWM 12 24V-20A LCD USB Bedienungsanleitung

Victron Ladegerät BlueSolar PWM 12 24V-20A LCD USB

Lies die bedienungsanleitung für Victron BlueSolar PWM 12 24V-20A LCD USB (61 Seiten) kostenlos online; sie gehört zur Kategorie Ladegerät. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 9 Bewertungen. Hast du eine Frage zu Victron BlueSolar PWM 12 24V-20A LCD USB oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/61
Manual
EN
Handleiding
NL
Manuel
FR
Anleitung
DE
Manual
ES
Manual
SE
IT
Appendix
BlueSolar PWM Charge Controller LCD - USB
12V | 24V | 5A
12V | 24V | 10A
12V | 24V | 20A
1
EN NL FR DE ES SV IT Appendix
1. General Information
The BlueSolar PWM Charge Controller series uses Pulse Width Modulation (PWM)
charge voltage control combined with a multistage charge control algorithm.
2. Features
Three stage battery charging [bulk absorption – float]
Battery type: Lead-acid and LiFePO4 (with internal BMS)
Protected against over current.
Protected against short circuit.
Protected against reverse polarity connection of the solar panels and/or battery.
Low voltage load disconnect.
Temperature protection.
3. Installation
Important note: always connect the batteries first.
IMPORTANT
Always connect the battery first, in order to allow the Controller
to recognize system voltage
Use a 12V (36 cells) solar array for a 12V system.
Use a 24V (72 cells) solar array for a 24V system.


Produktspezifikationen

Marke: Victron
Kategorie: Ladegerät
Modell: BlueSolar PWM 12 24V-20A LCD USB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Victron BlueSolar PWM 12 24V-20A LCD USB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten