Vigitron MaxiiPower Vi22001 Bedienungsanleitung

Lies die bedienungsanleitung für Vigitron MaxiiPower Vi22001 (2 Seiten) kostenlos online; sie gehört zur Kategorie Netzwerkkarte / Adapter. Dieses Handbuch wurde von 8 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 4.5 Bewertungen. Hast du eine Frage zu Vigitron MaxiiPower Vi22001 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Application Drawing

Vi22001 Single Port 90W PoE++ Midspan Installation Manual

IP Camera-end Installation

The Smart Choice for Transmission Solutions www.vigitron.com

Important Safety Warning

- Connect the UTP Cables (Cat5/6) from the IP camera or other PoE

powered device to the “Data + PoE” RJ45 connector of Vi22001. The cable

must be a Cat5/6 with a maximum length of 100m (328 feet).

Ethernet Switch/NVR-end Installation

- Connect the UTP Cable (cat5/6) from the Ethernet switch to the “Data”

RJ45 connector of Vi22001. The total length of UTP cable from network

switch to the powered PoE device should not exceed 100m (328 feet).

- Plug the AC power cord provided with the unit to the mains.

- Read these instructions. Keep these instructions. Heed all warnings.

- Follow all instructions.

- Do not use this apparatus near water.

- Clean only with a dry cloth.

- Install in accordance with the manufacturer’s instructions.

- This installation should be made by a qualified service person and should

conform to all local codes.

- DO NOT bundle UTP signal wires in the same conduit as high-voltage wiring.

- To reduce the risk of fire or electrical shock, do not expose these products

to rain, moisture, dripping or splashing.

- No objects filled with liquids, such as vases, shall be placed on Vigitron

equipment.

- DO NOT install the unit in a place where the operating ambient

temperature exceeds 60°C.

- Make sure that the power source voltage is in the recommended range.

- Do not install near any heat sources such as radiators, heat registers,

stoves or other apparatus that produce heat.

- Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

- Only use attachments/accessories specified by the manufacturer.

- Unplug this apparatus during lightning storms or when unused for long

periods of time.

- Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as a power

supply cord or plug is damaged, liquid has been spilled, or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

- The mains plug is used as the disconnect device and shall remain readily

operable.

WARNING! - To reduce the risk of fire or electric shock, do not expose

this apparatus to rain or moisture. This apparatus shall not be exposed to

dripping or splashing and no objects filled with liquids, such as vases shall

be placed on the apparatus.

WARNING! - This apparatus is a Class I product. This product must

be connected to a mains socket outlet through an AC to DC Power supply

when using DC input.

WARNING! - The mains plug is used as the disconnect device and

shall remain readily operable.

The MaxiiPower Model Vi22001 is a unique Single port PoE Midspan

designed for the most demanding power applications of 10/100/1000

Base-T networks. With the ability to provide up to 90W PoE power, it is the

most cost effective method for powering PTZ domes cameras with heaters

and blowers. The Midspan is compliant IEEE 802.3af, IEEE 802.3at up to

90W PoE application.

The Vi22001 can virtually meet requirements of any high power PoE

application. Its unique internal control system enables it to handle both

single PD and dual PD PoE devices.

The Midspan is equipped with LEDs to provide power status. No IP setting

or configurations are required and it can completely transparent to the

Ethernet network and higher layer protocols.

The Vi22001 is smaller, lighter and easier to fit in environmental enclosures

than most single channel power supplies.

Vi22001_UM

DO NOT OPEN

RISK OF ELECTRIC SHOCK

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,

DO NOT REMOVE COVER. NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Powering High power PoE devices at Extended Distances

Powering PoE devices at standard and extended distances

Vi22001

Coax

Cat 5/6

Network Switch

Vi22001

Vi22001

Vi22001

IP Camera

IP Phone

Data + PoE

IP Cameras

Vi3005

90W PTZ Dome

60W IR/

LED Light

Data + 90W PoE

328 ft. (100m)

Vi22001

Data + 90W PoE

328 ft. (100m)

Data + 90W PoE

DataDataDataData

328 ft. (100m)

Data + 90W PoE

328 ft. (100m)

328 ft. (100m)

Data + PoE

328 ft. (100m)

Data + 90W PoE

328 ft. (100m)

The Vi22001 can be used to provide power to a wide variety high PoE power PoE powered devices with Single or Dual PDs.

Network Switch

Vi22001

Vi2301A

Vi2301A

IP Camera

Data + 90W PoE

328 ft. (100m)

The Vi22001 can be used along with extenders to provide power to PoE powered devices at long distances.

Maxii

Power

TM

Produktspezifikationen