Viking PDDP242 Bedienungsanleitung


Lies die bedienungsanleitung für Viking PDDP242 (8 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 12 Bewertungen. Hast du eine Frage zu Viking PDDP242 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
Installation Guide
Dishwasher Door Panel Kits
PDDP242 / RVDP324/TVDDP24
2
Door Panel Installation
For FDW300/FDW300WS/FDW100/FDW100WS/FDW101 and
FDW101W Models (Purchased Separately)
C
D
C
D
The unit comes with everything needed to make installing the door panel easy.
What you will need:
Phillips Head #8 1-3/4” long, Stainless Steel
Screwdriver Phillips Head Screw
(4 supplied)
Dishwasher Door
Plastic
Retainers
Door Panel
3
Installation
1
Plastic
Retainers
2
3
x2
D
D
D
C
C
4
x4
D
D
Remove plastic retainers from door panel
and discard.
Remove plastic mounting brackets from
the dishwasher and discard.
Carefully open the dishwasher door.
Remove the (2) white caps from holes (C)
and the (2) top screws from holes (D) on
dishwasher door.
Carefully secure the door panel to the
dishwasher through holes (D) using the four
at PHD screws provided. Carefully tighten
all four screws and check to ensure that the
panel is square with the dishwasher door.
Do not over tighten screws. This may
cause damage to the inner door.
Note: Verify the operation of the door counterbalance springs after installation of the door skin.
Note: Verify that the door does not hit the kickplate. Adjust kickplate if necessary.


Produktspezifikationen

Marke: Viking
Kategorie: Nicht kategorisiert
Modell: PDDP242

Brauchst du Hilfe?

Wenn Sie Hilfe mit Viking PDDP242 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten