Viotek GN32C Bedienungsanleitung
Lies die bedienungsanleitung für Viotek GN32C (11 Seiten) kostenlos online; sie gehört zur Kategorie Monitor. Dieses Handbuch wurde von 11 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 6 Bewertungen. Hast du eine Frage zu Viotek GN32C oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/11

CURVED GAMING MONITOR
USER MANUAL

VIOTEK
Read and observe the following warnings and informaon below.
Safety Precauons and Maintenance
1. Before cleaning, always unplug your monitor. It is recommended to use dry
cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the
safest. If using damp cloth, wait for your monitor to completely dry before
plugging it in again.
2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your
monitor.
3. This monitor features venlaon openings on the back of the unit. Avoid
blocking these openings to prevent the monitor from overheang.
4. Avoid placing this monitor near any heat sources e.g: portable heaters or
heang vents, as this may cause damage to your monitor.
5. Do not spray cleaner and or any kind of liquid directly onto the monitor's screen
or any part of the monitor.
6. Do not insert anything into any part of the monitor especially the venlaon
openings.
7. Always make sure your monitor is placed on a secure, level surface to
prevent it from falling and sustaining damage.
8. Unplug your monitor during any extended periods of non-use.
9. Do not place heavy items on the monitor or monitor cables.
10. Do not aempt to dissemble the monitor or remove parts from monitor.
Any disassembly or modificaon etc. not performed by an authorized
technician can result in damage to the monitor and/or possible exposure to
high voltage electricity which may lead to serious injury or death.
Viotek shall not be held responsible for injury or damage of products or persons
due to failure to adhere to the aforemenoned precauons or any others noted
hereaer.
All specificaons and informaons are subject to change without noce.
-1-

DVI Connector HDMI Connector DP Connector
Indicator Light
AC IN Connector
Box Contents
1x Monitor
1x Power Cable (AC 100-240V 50/60Hz)
1x HDMI Cable
1x User manual
Basic Setup
1. Insert one end of the VGA video cable into your PC's graphics card. DVI, HDMI, or
display port (DP) may also be used. These cables are not included.
Note: For opmal refresh rate (or "performance") at 144hrz, it is recommended to
use a Display Port (DP) or DVI-D dual link cable with the monitor's corresponding
connector.
2. Connect the other end of the video cable to the corresponding connector on
your monitor. See the image below.
3. Connect the power cable to your monitor then connect the other end to your
power source such as a wall outlet or surge protector. It is recommended to
use a surge protector.
4. Locate the power buon on the monitor and press it to turn the monitor on.
Note: If you cannot locate the power buon, please refer to the Control Panel
Secon on the next page.
If desired, you can use the monitor's FreeSync feature. The feature itself is on by
default. In order to use this feature, please note you must have hardware with
FreeSync capability, a DP, and the latest graphic drivers. To use FreeSync, connect
the appropriate cable to the DP connectors on both the computer and the monitor.
Aer connecng, you will receive a prompt to enable FreeSync on your computer.
Indicator Light
This light is located on the front of the monitor.
Solid blue light indicates power is on and the monitor is operang normally.
Flashing blue light indicates no video source has been detected. Please ensure your
PC is on and all video cables are fully inserted and/or connected.
Connectors in this graphic are not to scale. Also the small numbers inside the DVI and HDMI graphics can
be removed.
All specificaons and informaons are subject to change without noce.
-2-
Produktspezifikationen
Marke: | Viotek |
Kategorie: | Monitor |
Modell: | GN32C |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Viotek GN32C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Monitor Viotek
31 August 2024
31 August 2024
31 August 2024
30 August 2024
30 August 2024
26 Mai 2024
1 März 2024
Bedienungsanleitung Monitor
- Shimbol
- Joy-it
- JVC
- TCL
- PreSonus
- Jay-Tech
- Sunstech
- Thomson
- Emachines
- ADS-TEC
- AIS
- HKC
- ONYX
- Advantech
- Alesis
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025