Vitek VTD-TNMD5RFS-2 Bedienungsanleitung

Lies die bedienungsanleitung für Vitek VTD-TNMD5RFS-2 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 15 Personen als hilfreich bewertet. Hast du eine Frage zu Vitek VTD-TNMD5RFS-2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

/ 2 PDF

1

2

Network Cable & Power Connections

First connect the Waterproof Cap to an Ethernet patch cable, then

connect the cameras ethernet adaptor. If not powering the camera with

PoE, also connect the power Cable to an approved 12VDC Power

Supply.

Weather Resistant Network Coupler

1. Loosen the nut from the Weather Resistant Network Coupler,

2. Run ethernet cable through coupler, then attach a RJ-45 connector.

3. Tighten the nut and coupler for a weather resistant seal.

12VDC

Optional 12VDC

Power Connection.

Not needed with PoE

Network Cable

Overview

Installation

Before beginning installation, make sure that the wall or ceiling is

strong enough to withstand 3 times the weight of the camera. The

mounting steps are as follows:

2. Loosen the screws to open

the lower dome and then

loosen the lock screw to

remove the mounting base.

1. Attach the drill template to

the place where you want to

install the camera, then drill

the screw holes and 1 cable

hole according to the drill

template.

3. Route the cables and

connect the power & video

cables, use the rubber plug

to fill the gap of the mounting

base. then secure the

mounting base to the ceiling

or wall with screws.

VITEK

VTD-TNMD5RFS-2

Transcendent Series 5

Megapixel H.265 Indoor/

Outdoor WDR IP Dome Camera

with 10 IR LED Illumination

QUICK START GUIDE

FOR FULL PRODUCT MANUAL

SCAN THE QR CODE BELOW

FEATURES

• 1/2.5” 5.0 Megapixel Progressive Scan CMOS image sensor

• Up to 30fps live view @ 5 MegaPixel (2592×1944)

• 2.8mm Fixed Iris Lens

• 10 IR LED Illumination with a 35’ IR Range

• 120dB Super Wide Dynamic Range (WDR)

• True Mechanical Day/Night function by ICR

• XD-DNR (2D-DNR & 3D-DNR) Noise Reduction

• Fully Programmable Intelligent Analytics including Face Detection,

Object Removal/Museum Search, Exception, Line Crossing, Area

Intrusion, People Counting, People Intrusion, Crowd Density Monitoring

• H.265/H.264/MJPEG Triple Streaming

• Secondary Video Output (CVBS)

• Remote Viewing via CMS, Internet Explorer, and iOS & Android Apps

• ONVIF Compliant

• IP66 Weather Resistance & IK10 Impact Rating

• Optional Wall Mount Available (VT-TWMT-3)

• 12VDC & PoE (Power over Ethernet) Operation

43

Components and Accessories

• Micro SD Card support up to 128GB

Network Cable

MIC IN Cable

CVBS Cable

PowerCable

TF Card Slot

Reset

1

2

3

5

6

4

1

2

3

4

5

6

Camera

Quick

start guide

Plastic

plug ×2

Drilltemplate

Screwdriver

2 tapping screws PA 4×25

Produktspezifikationen