Vivanco PCI -> 10/100/1000 Mbps Ethernet Card Bedienungsanleitung

Vivanco Netzwerkkarte / Adapter PCI -> 10/100/1000 Mbps Ethernet Card

Lies die bedienungsanleitung für Vivanco PCI -> 10/100/1000 Mbps Ethernet Card (21 Seiten) kostenlos online; sie gehört zur Kategorie Netzwerkkarte / Adapter. Dieses Handbuch wurde von 35 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 18 Bewertungen. Hast du eine Frage zu Vivanco PCI -> 10/100/1000 Mbps Ethernet Card oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/21

23406 PCI Gigabit Ethernet Card

PCI Gigabit Ethernet Card

User´s Guide

Bedienungsanleitung

Notice d'emploi

Instrucciones de uso

Istruzioni per l'uso

Gebruiksaanwijzing

Instruções de uso

Instrukcja obsługi

Brugermanualer

Bruksanvisning

EDV Nr. 23406

NET 1000 PCI-N

23406 PCI Gigabit Ethernet Card

1. Introduction

Thank you for purchasing the Vivanco 10/100/1000 Gigabit Ethernet Adapter. This Gigabit Ethernet

Adapter allows to connect your PC to a wired 10, 100 or 1000 Mbps network.

This card is equiped with 2 LEDs indicating the Link/Activity status in 10Mbps, 100Mbps or 1000Mbps

environment.

• Link/Activity (Link/ACT):

This indicator lights green when the RJ-45 port is connected to a Ethernet network, if the indicator

blinking green will be transmissing/received data to/from the Ethernet network.

• Link Speed Indicator (SPEED):

The indicator lights green when the port is connected to 1000Mbps Gigabit Ethernet Network and

the indicator lights amber when the port is connected to 100Mbps Fast Ethernet Network.

Otherwise, this indicator remains off when the port is connected to a 10Mbps Ethernet Network.

Technical Specifications

General

Standards IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit Ethernet

ANSI/IEEE NWay Auto-Negotiation

32-bit CardBus PC Card

Protocol CSMA/CD

Data Transfer Rate Ethernet: 10Mbps (half-duplex)

20Mbps(full-duplex)

Fast Ethernet: 100Mbps (half-duplex)

200Mbps (full-duplex)

Gigabit Ethernet: 2000Mbps (full-duplex)

Network Cables 10BASE-T: 2-pair UTP Cat. 3,4,5

EIA/TIA- 568 100-ohm STP

100BASE-TX: 2-pair UTP Cat. 5

EIA/TIA- 568 100-ohm STP

1000BASE-T: 4-pair UTP Cat. 5e

EIA/TIA- 568 100-ohm STP

Physical and Environmental

Temperature Operating: 0° ~ 50° C, Storage: -10° ~ 70° C

Humidity Operating: 10% ~ 90%, Storage: 5% ~ 90%

EMI: FCC Class B, CE Mark B, VCCI-B

23406 PCI Gigabit Ethernet Card

2. Hardware Installation

This section describes how to install your Vivanco Gigabit Ethernet Card. Please perform the following

steps to install the card.

1. Turn off your computer and all peripherals.

2. Make a note of how the cables and cords are connected to the computer and disconnect them.

3. Remove your personal computer’s cover (please refer to the owner’s manual of your personal

computer).

4. Discharge the static electricity you might carry by for example touching with your hands the metallic

backside of your computer.

5. Select any available bus mastering PCI slot, and remove the slot cover.

6. Carefully install the Vivanco Fast Ethernet Card into the expansion slot by firmly pressing the card

into the connector slot, until the Card is seated well in the expansion slot, then fasten the card with

a screw from the slot cover.

7. Reinstall your personal computer’s cover and reconnect the power cord and all cables.

8. Connect the Ethernet cable to the RJ-45 connector on your personal computer.

Connect to the Network

Simply plug one end of the cable (RJ-45 connector) into an available hub/switch port, and plug the

other end (RJ-45 connector) into the RJ-45 port of the Vivanco 10/100/1000 Gigabit Ethernet card.

3. Installation of the driver

Windows® 98 SE

1. After starting Windows 98SE, the windows will automatically detect new hardware, and then the

'Found New Hardware Wizard' window appears.

2. Insert the driver CD into the CD-ROM drive.

3. Select the recommended menu item (automatically), and then click the "Next" button.

4. Follow the instructions on the monitor in order to proceed with the installation.

5. Click "Finish" to complete the installation.

Windows® ME/2000/XP/Server 2003/Vista

Windows will automatically install the drivers for Vivanco Gigabit Ethernet Card.

Produktspezifikationen

Marke:	Vivanco
Kategorie:	Netzwerkkarte / Adapter
Modell:	PCI -> 10/100/1000 Mbps Ethernet Card
Produktfarbe:	Silber
Übertragungstechnik:	Kabelgebunden
Eingebauter Ethernet-Anschluss:	Ja
Maximale Datenübertragungsrate:	2000 Mbit/s
Eingebaut:	Ja
Kompatible Betriebssysteme:	Windows 98 SE, 2000, ME, XP, Vista
Hostschnittstelle:	PCI
Link/Act-LED:	Ja
Konformität mit Industriestandards:	IEEE 802.3, 802.3u, 802.3ab, IEEE 802.3Q
Datenrate:	10/100/1000 Mbps
Anzahl Anschlüsse:	1