Vivo MOUNT-KB05E Bedienungsanleitung
Vivo
Nicht kategorisiert
MOUNT-KB05E
Lies die bedienungsanleitung für Vivo MOUNT-KB05E (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Vivo MOUNT-KB05E oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
Clamp-on Keyboard Tray
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb05e
SKU: MOUNT-KB05E/W/N
help@vivo-us.com www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
ASSEMBLY STEPS
STEP 1
STEP 2
Assemble Keyboard Tray using Connecting Plates and M5x12mm Flat Head Screws , and (A) (E) (S-C)
tighten with a Phillips screwdriver.
Attach to the back of Keyboard Tray using M5x12mm Flat Head Screws Keyboard Stop (F) (A) (S-C).
Tighten with a Phillips screwdriver.
PACKAGE CONTENTS
TOOLS NEEDED
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualied technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specied in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-A (x6)
M4x7mm Screw
S-B (x8)
M5x12mm Screw
D (x2)
Pad
E (x2)
Connecting Plate
S-C (x12)
M5x12mm Flat Head Screw
A (x1)
Keyboard Tray
B (x2)
Sliding Bracket
C (x2)
Clamp
F (x1)
Keyboard Stop
NOTE: 2 Extra screws have been included of each
A
E
S-C
F
A
S-C
3
STEP 3
STEP 4
STEP 5
Right
Lef
t
Desktop
Assemble Slider Brackets to Keyboard Tray using M5x12mm Screws , and tighten with a (B) (A) (S-B)
Phillips screwdriver. The slider brackets should protrude from the back of the keyboard tray.
NOTE: If the keyboard tray is not sliding in completely , remove the keyboard backstop on the tray.
This will allow for an extra 0.75” (19mm) of clearance. If more clearance is needed, change the
orientation of the desk having the sync rod facing towards you. This will avoid the crossbar and cable
tray entirely.
Assemble Clamps to Slider Brackets using M4x7mm Screws(C) (B) (S-A). Tighten with a Phillips
screwdriver.
NOTE: Clamp can be oset using the extra holes in Slider Brackets (B) to allow the tray to be pulled
out an extra 1.2” (30mm) when in use. If mounted this way the tray will sit further out from desk edge.
Place Pads on the underside of each Clamp (D) (C). Place assembled keyboard mount on the edge of
the desk and tighten clamps.
NOTE: To ensure keyboard tray is level, do not over-tighten clamps.
B
A
S-B
C
B
S-A
D
C
Produktspezifikationen
| Marke: | Vivo |
| Kategorie: | Nicht kategorisiert |
| Modell: | MOUNT-KB05E |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Vivo MOUNT-KB05E benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Vivo
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Belena
- SilverCrest
- Maginon
- Hudora
- Kaiser Fototechnik
- Standard Horizon
- MagnaPool
- Mytee
- SVAT
- Alba
- Gioteck
- Hämmerli
- Intel
- Beeletix
- OneTouch
Neueste Bedienungsanleitung für -Kategorien-
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025