WAC Lighting FM-306MS Bedienungsanleitung
Seiten 1 Beleuchtung
Lies die Bedienungsanleitung für WAC Lighting FM-306MS kostenlos online oder lade das PDF herunter. 19 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. AUGUST 3, 2015 5:28 PM
INSTALLATION INSTRUCTION
LED DISC - Motion Sensor
FM-306MS
WARNING
IMPORTANT: NEVER attempt any work without shutting off the electricity.
- Read all instructions before installing.
- System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local regulations.
- Go to the main fuse box, or circuit breaker. Place the main power switch in the “OFF” position and unscrew the fuse(s) or
switch ”OFF” the circuit breaker switch(es) that control the power to the fixture or room that you are working on.
- Place the wall switch in the “OFF” position.
- Supply conductors (Power Wires) Connecting the fixture must be rated minimum 90°C. If uncertain, consult an electrician.
CAUTIONS
- These luminaires (fixtures) are designed to meet the latest NEC requirements and are listed in full compliance with UL 1598.
- Before attempting installation, check your local electrical code, as it sets the wiring standards for your locality.
Fig. 1
1.Attach two mounted screws into outlet box leaving enough of
screw exposed to engage keyholes in the top of disc light
(
Fig. 1).
Note: For 3" holes, please install the mounting bar provided.
2.Provide electrical service according to the “National Electrical
Code” or your local electrical code to the outlet box.
3.Connect supply wires to fixture wires and insulate with proper
size wire nuts ().Fig. 1
4.Connect incoming ground wire (green or bare) to fixture ground
wire (green or bare).
5.Connect incoming common (white) wire to fixture common
(white).
6.Connect incoming hot (typically black) wire to fixture black wire.
7. (or mounting bar)Raise the disc light to the junction box and
tighten screws.
LENS INSTALLATION
Twist the lens clockwise on disc light metal enclosure and lock the
lens in place.
Outlet Box (not included)
Mounted Screw
Keyholes
Disc Light
Ground
Lens
INSTALLATION
Over standard electrical box4" junction box or 3/0-4/0
Produktspezifikationen
| Marke: | WAC Lighting |
| Kategorie: | Beleuchtung |
| Modell: | FM-306MS |
Brauchst du Hilfe?
Wenn Sie Hilfe mit WAC Lighting FM-306MS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung WAC Lighting
WAC Lighting FM-27214 Bedienungsanleitung WAC Lighting BL-1021L Bedienungsanleitung WAC Lighting BL-25214 Bedienungsanleitung WAC Lighting FM-252218 Bedienungsanleitung WAC Lighting FM-07SQ Bedienungsanleitung WAC Lighting BL-73314 Bedienungsanleitung WAC Lighting FM-63216 Bedienungsanleitung WAC Lighting 3911 Bedienungsanleitung
Alle WAC Lighting Beleuchtung Bedienungsanleitungen
Beliebt in Beleuchtung
WAC Lighting DS-WD05 Bedienungsanleitung WAC Lighting MO-LED512 Bedienungsanleitung WAC Lighting WS-W33125 Bedienungsanleitung
Bedienungsanleitung Beleuchtung
Neueste Bedienungsanleitungen für Beleuchtung
IKEA KRUSNATE 205.641.78 Bedienungsanleitung IKEA MOLNART 706.212.04 Bedienungsanleitung Robert Abbey Z2187 Bedienungsanleitung Robert Abbey S1006 Bedienungsanleitung IKEA RANARP 103.999.28 Bedienungsanleitung Robert Abbey A767X Bedienungsanleitung IKEA KUDDLAVA 906.011.96 Bedienungsanleitung IKEA BÄVE 003.997.35 Bedienungsanleitung Robert Abbey 3390 Bedienungsanleitung Robert Abbey RR42X Bedienungsanleitung