WAC Lighting HTK-730 Bedienungsanleitung

Lies die bedienungsanleitung für WAC Lighting HTK-730 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 5 Bewertungen. Hast du eine Frage zu WAC Lighting HTK-730 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

WAC Lighting

www.waclighting.com

Phone (800) 526.2588 • Fax (800) 526.2585

Headquarters/Eastern Distribution Center

44 Harbor Park Drive • Port Washington, NY 11050

Phone (516) 515.5000 • Fax (516) 515.5050

Western Distribution Center

1750 Archibald Ave • Ontario, CA 91761

Phone (800) 526.2588 • Fax (800) 526.2585

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2014

INSTALLATION INSTRUCTION

730rack LuminairesLineVoltage T

H-, L-, J-TK730TK730TK730

CAUTION:

Read all instructions before installing.

Switch o power before installing or re-lamping.

Do not attempt to energize anything other than a track light xture.

All installation shall be in accordance with NEC and all local codes

OVERVIEW:

Fixtures are designed for use on WA“L” C , “H, ”“J” series track.

They may also be used on other manufacturers brand of track ’

(consult factory for compatibility).

LAMPING:

1.Install Lamp. See Specification sheet for compatible lamps.

2.Insert lamp into the shade so the lamp pins protrude

through the back.

3.Place pins in the socket holes and twist 1/4” to the right.

The lamp should feel rmly seated.

FIXTURE INSTALLATION

1.Note the track has a groove running it’s length to indicate polarity.

2.Note the arrow on the locking tab.

3.Insert adapter into track slot and rotate it 90 .The arrow should

point to the grooved side of the track.

4.Make sure the locking tab seats in the track slot.

5.Removal is the reverse procedure. Track heads may be positioned

anywhere along the track length.

Push, then twist lamp

Produktspezifikationen