WAC Lighting MT4LD216NE Bedienungsanleitung
Seiten 3 Nicht kategorisiert
Lies die Bedienungsanleitung für WAC Lighting MT4LD216NE kostenlos online oder lade das PDF herunter. 17 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. SEPTEMBER, 2015
a. With HANGERb. With 1/2
CHANNEL (not included)
c. With 3/4
CHANNEL (not included)
d. With 1 1/2
CHANNEL (not included)
e. With ROUND
CHANNEL (not included)
INSTALLATION INSTRUCTION
Precision Multiples
4” LED Adjustable recessed downlights MT-4LD
Fig. 1Fig. 2Fig. 3Fig. 4Fig. 5
2. Install the mounting frame using two hanger bars. Bars are notched on
the ends to t over “T” bars in suspended ceilings.Hanger bars include
a captive mounting “screw-nail” for ease of installation (Fig.6). Align the
bottom of the hanger bar with the bottom of the wood joist. Secure the
“screw-nail” on each end by screwdriver (Fig. A), or by hammer (Fig. B).
3. Pinch the adjustable bracket, slide the xture along hanger bars into
desired location (Fig. C).
4. The junction box is suitable for branch wiring and has trade size knock-
outs and integral non-metallic sheathed cable connectors.
Fig. C
Fig. 6
Fig. AFig. BFig. C
Fig. A / Fig. B
IMPORTANT SAFETY INSTRUCTIONS
1. Read all instructions before installing.
2. System is intended for installation by a qualied electrician in accordance with the National Electrical Code and
local regulations.
3. Go to the main fuse box, or circuit breaker. Place the main power switch in the “OFF” position and unscrew the fuse(s) or switch ”OFF” the
circuit breaker switch(es) that control the power to the xture or room that you are working on.
4. Place the wall switch in the “OFF” position.
INSTRUCTIONS DE SÉCURITÉ IMPORTANTES
1. Lisez toutes les instructions avant d’installer.
2. Système est destiné à être installé par un électricien qualié en conformité avec le code national de l’électricité et
les règlements locaux.
3. Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en position d’arrêt («OFF »).
4. Placez l’interrupteur mural en position d’arrêt (« OFF »).
OVERVIEW:
Housing is new construction
and requires a trim or invisible trim.
MOUNTING:
1. Adjust the housing to proper height by loosening the wing nut on both adjustable brackets and set the basic plate so that the bottom edge
of the frame is ush to the nished ceiling (Fig.1, Fig.2, Fig.3, Fig.4 and Fig.5) . Tighten the wing nut.
Table 1 - HOUSING OVERVIEW
MODELDIMMING TYPEIC RATINGINPUT VOLTAGEPOWER
MT-4LD*16N*0-10VNon-IC120V-277V16.5W
MT-4LD*16NE*ELVNon-IC120V16.5W
MT-4LD*11NE*ELVIC-Rated120V11.5W
Produktspezifikationen
| Marke: | WAC Lighting |
| Kategorie: | Nicht kategorisiert |
| Modell: | MT4LD216NE |
Brauchst du Hilfe?
Wenn Sie Hilfe mit WAC Lighting MT4LD216NE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert WAC Lighting
WAC Lighting H-1035N Bedienungsanleitung WAC Lighting MT-116HS Bedienungsanleitung WAC Lighting HR-AC73 Bedienungsanleitung WAC Lighting MT4LD316NE Bedienungsanleitung WAC Lighting J-2042 Bedienungsanleitung WAC Lighting JHT-007 Bedienungsanleitung WAC Lighting JTK-764 Bedienungsanleitung WAC Lighting HR-LED272R Bedienungsanleitung
Beliebt in Nicht kategorisiert
WAC Lighting L-1023 Bedienungsanleitung WAC Lighting H-LED208 Bedienungsanleitung WAC Lighting LED-T2430L Bedienungsanleitung