WAC Lighting T24-OD2 Bedienungsanleitung

Lies die bedienungsanleitung für WAC Lighting T24-OD2 (7 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 5 Bewertungen. Hast du eine Frage zu WAC Lighting T24-OD2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

INSTALLATION INSTRUCTION

InvisiLED Outdoor 100/200

T24-OD

SAFETY INSTRUCTION

IMPORTANT: NEVER attempt any work without shutting off the electricity.

•Always turn off power at fuse box prior to installation to prevent electrical shock.

•For installation and serviced by a qualified, licensed electrician.

•Install in accordance with national electric code, and local regulations.

•Consult with local inspector to assure compliance.

•Do not submerge the tape into the water.

•Only install with a WAC UL listed Class 2 24VDC LED power supply.

•Do not connect the tape directly to high voltage power

•Do not exceed maximum run recommended for each tape series

•Do not connect the tape with 24VAC output Electronics transformer.

CAUTION

•Read all instructions before installing.

•Handle product with care.

•Do not modify or disassemble product beyond instructions or warranty will be void.

•Cutting anywhere other than the cut point will result in a damage to the tape light

•Failure to follow safety warnings, and installation instruction will void the warranty

•Tape light will begin to flash if maximum rated output power from WAC 24VDC power supply is overloaded.

Do not bend the tape

light to a diameter less

than 4 inches

Do not bend the tape

light on a horizontal

plane

Do not fold or twist LED Tape

Do not cover LED tape light

with any materials

Do not power the LED tape

while attached to the spool or

tightly coiled

Avoid contact with

sharp objects

Install on stable clean,

dry surface

Produktspezifikationen