WAC Lighting WL-LED200TR Bedienungsanleitung

Lies die bedienungsanleitung für WAC Lighting WL-LED200TR (1 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 3 Bewertungen. Hast du eine Frage zu WAC Lighting WL-LED200TR oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

WAC Lighting

www.waclighting.com

Phone (800) 526.2588 • Fax (800) 526.2585

Headquarters/Eastern Distribution Center

44 Harbor Park Drive • Port Washington, NY 11050

Phone (516) 515.5000 • Fax (516) 515.5050

Western Distribution Center

1750 Archibald Ave • Ontario, CA 91761

Phone (800) 526.2588 • Fax (800) 526.2585

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JUNE, 2014

INSTALLATION INSTRUCTION

LED Step and Wall Lights - Trimless

WL-LED200TR

WARNING

IMPORTANT: NEVER attempt any work without shutting o the electricity.

- Read all instructions before installing.

- System is intended for installation by a qualied electrician in accordance with the National Electric Code

and local regulations. Consult with local inspector to ensure compliance.

- To reduce the risk of re, electrical shock and injuries to persons, turn o power at main switch before installing

or modifying the system.

- Retain instructions for future maintenance reference.

- Not complying with instructions could result in failure of the xtures and voiding of the warranty.

- This xture is intended to be installed in dry, indoor locations only!

INSTALLATION INSTRUCTIONS:

Junction box: 2” x 4” boxes to have minimum inside dimensions of 3”W x 2”H x 2”D in order to accommodate xtures. Note: Actual

depth of box to be determined in accordance with the NEC and local ordinances.

1. Install 2”x4” junction box.

2. Connect the xture wires to the junction box wires as follows: Black xture wire to black (Hot) J-box wire, white xture

wire to white (Neutral) J-box wire, and green xture wire to Ground. (See Fig.1)

Note: Multiple xtures (up to 200) can be wired together in parallel: Hot to hot, and neutral to neutral.

3. Place all wiring and connectors back in junction box and install the xture. (See Fig. 2)

4. Secure xture to J-box using (2) 8-32 at head screws (J-box by others, screws by WAC) as shown in Fig.2.

5. Spackle in xture and smooth/sand spackle so that xture is level with the rest of the wall. (See Fig. 3)

6. Paint wall and xture with desired color, leaving only the “ramp” painted white. (See Fig. 4)

Produktspezifikationen