WALI SWM402 Bedienungsanleitung


Lies die bedienungsanleitung für WALI SWM402 (4 Seiten) kostenlos online; sie gehört zur Kategorie Sprecher-Unterstützung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu WALI SWM402 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
INSTALLATION MANUAL
Speaker Wall Mount
SWM202 / SWM402 / SWM602
1-844-SATTLER (18447288537)
support@walielectric.com
www.walielectric.com
22.7kg/50lbs
RATED
2
SWM202
M6x12
Bolt
C (x2)
M5x12
Bolt
B (x4)
1/4 -20x1/2
Bolt
D (x2)
ST4.2X25
Screw
E (x4)
φ6X25
Anchor
F (x4)
Make sure that the supporting
surface will safely support the
combined load of the equipment
and all attached hardware and
components.
Make sure that mounting screws
are anchored into the center of the
studs. The use of an "edge to edge"
stud finder is highly recommended.
Tighten wood screws firmly but
do not overtighten. Over tightening
can damage the screws, greatly
reducing their holding power.
Use a stud finder to locate the edges of
the studs. Using an edge-to-edge stud
finder is highly recommended based on
their edges and drew a vertical line down
each stud's center.
Place metal wall plate on the wall as a
template. And mark the center of the two
mounting holes. Make sure that the
mounting holes are on the stud centerline.
Drill two 1/8" (3mm) dia. Holes 1" (25mm)
deep. Secure it using two screws
(part - ). Make sure that the wall plate
is level as shown in the figure.
E
E
Option A : Wood Stud Mounting
Supplied Parts List
3
Step 1
Step 2


Produktspezifikationen

Marke: WALI
Kategorie: Sprecher-Unterstützung
Modell: SWM402

Brauchst du Hilfe?

Wenn Sie Hilfe mit WALI SWM402 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten