Wet Sounds WW-BT-VC Bedienungsanleitung

Lies die bedienungsanleitung für Wet Sounds WW-BT-VC (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 36 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 18.5 Bewertungen. Hast du eine Frage zu Wet Sounds WW-BT-VC oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Installation Instructions:

Surface Mount Instructions:

Flush Mount Instructions:

Drill a 7/8" hole. Unscrew the locking nut on the back of the device

and pull apart. Slide the unit thru the hole and attach the nut on the

back side.

Note: You can adjust the orientation of the knob in either of

the two mounting positions by loosening the nut on the back

side and rotating the knob to a dierent position. Example,

the mark can either be at 12, 3, 6 & 9 o'clock position.

Skip one track back

• Skip one track back

Adjust volume UP

• Turn and hold the knob clockwise.

Adjust volume DOWN

• Turn and hold the knob counter-clockwise.

• Hook the red wire to 12volt +

• Hook the black wire to 12 volt -

• Insert a 3.5 mm audio cable into the back of the device and connect

to your source or amplier.

Use the 2 Phillips screws to mount

Operation Instructions:

Play music (Some phones may require you to start a media player

rst)

• Tap the knob once.

Pause music

Skip one track forward

• Tap the knob to pause, and tap again to resume playing.

• Turn the knob clockwise.

InstructionDuration

Tap

Turn Approx: 1 second

Press briey

Turn and holdApprox: 3 seconds

Bluetooth® device is connected to phones using a procedure called

pairing. By following a few simple steps, a phone can easily be

paired with the WW-BT-VC.

Follow your phones instruction guide for Bluetooth® pairing. First

make sure that Bluetooth is activated on your mobile phone. Then

set your phone to discover the Bluetooth device. This usually

involves going to settings, connect or Bluetooth menu on your

phone and selecting the option to discover or add a Bluetooth

device. Your phone will nd the Bluetooth® receiver under the

name WW-BT-VC. After selecting WW-BT-VC your phone will

conrm when pairing is complete.

1. Press the knob and hold until you see red and blue LED

lights blinking . At this time, it gets into pair status.

2. Set your Bluetooth phone to search for the Bluetooth®

device (WW-BT-VC).

The WW-BT-VC is easy to operate. One knob performs dierent

functions depending on how long you turn and hold it:

1 2

Produktspezifikationen