Whirlpool ADG 8532/2 Bedienungsanleitung
Seiten 4 Engels Spülmaschine
Lies die Bedienungsanleitung für Whirlpool ADG 8532/2 kostenlos online oder lade das PDF herunter. 18 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
How to use the appliance
Further indications are given in the single chapters and in the user instructions.
Press the ON/ OFF button.
(The first time you use the appliance
and when using a different type of
detergent)
1.Select the third programme from the
top in the relative table.
2.Press the Start button for about 7
seconds until the display changes.
3.Select the required detergent with the
Start button: “3h” = 2in1, “6h” = 3in1, “9h” = All in 1, all three LEDs
on = soap powder (factory setting).
4.Switch the appliance off and then switch it on again. The type of detergent
selected is shown by the relative LED for approximately three seconds.
For dosage of powder detergent in compartment A and B refer to the
programmes table.
Mechanical indicator C.
Electric indicator on control panel (if provided).
On models with water softener
system only.
Mechanical indicator D. Electric
indicator on control panel (if provided).
Refer to the dishwasher loading instructions.
The last programme selected will light up.
Select the desired programme (using the specific button or knob).
The corresponding indicator lamp lights up.
If necessary (and if provided).
The corresponding indicator lamp lights up.
The selected programme is
then memorised (even in the
event of power failure).
-Only open the dishwasher if necessary
(Warning: beware of hot steam).
-If the appliance is switched off during a
wash cycle, when switched on again it
will resume the cycle from where it was
interrupted.
Only after the START button has switched off: Press the ON / OFF button.
All the indicator lamps switch off.
Warning: When the door is opened steam comes out!
Unload the appliance, starting from the lower rack.
Switch on the appliance
Select, save, and
supply the detergent
AB C
Check the rinse aid level
Check the
regeneration salt level
Load the racks
Close the dishwasher door,
turn on the water tap
Select a programme
Select additional options
Press the Start button
“Change programme in progress”
Press the START button for 2 sec. until the
Start indicator lamp switches off.
Select another programme and press the
START button again.
Wash cycle
Switch off the appliance
Turn off the water tap,
unload the racks
Alle Fehlercodes Whirlpool Spülmaschine 9 Fehlercodes aus 7 Bedienungsanleitungen, mit Bedeutung.
Produktspezifikationen
| Marke: | Whirlpool |
| Kategorie: | Spülmaschine |
| Modell: | ADG 8532/2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Whirlpool ADG 8532/2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Spülmaschine Whirlpool
Whirlpool ADG 8798 A++ PC FD Bedienungsanleitung Whirlpool ADP 7453 WH Bedienungsanleitung Whirlpool WDF560SAFT Bedienungsanleitung Whirlpool ADG 8516/1 IX Bedienungsanleitung Whirlpool ADG 6450/1 AV Bedienungsanleitung Whirlpool WUO 3T333 PF Bedienungsanleitung Whirlpool ADG 689/3 IX Bedienungsanleitung Whirlpool WDTA50SAKW Bedienungsanleitung
Alle Whirlpool Spülmaschine Bedienungsanleitungen
Beliebt in Spülmaschine
Whirlpool WFC3B16X Bedienungsanleitung Whirlpool ADG 110 Bedienungsanleitung Whirlpool ADG 4620 IX Bedienungsanleitung
Bedienungsanleitung Spülmaschine
Neueste Bedienungsanleitungen für Spülmaschine
BEKO BDIN4S560WP Bedienungsanleitung Tornado TDV-FN158CBK Bedienungsanleitung Siemens SN63HX01CN Bedienungsanleitung Bosch SMS4HMI08E Bedienungsanleitung Siemens SN25EI64MM Bedienungsanleitung Privileg RUO 2T133 A F S Bedienungsanleitung Smeg STL324BLDE Bedienungsanleitung Smeg STL324AQLLHDE Bedienungsanleitung LG LDNPQ445S Bedienungsanleitung Smeg STL324BLHDE Bedienungsanleitung