Whirlpool UMV1170LW Bedienungsanleitung
Whirlpool
Mikrowelle
UMV1170LW
Lies die bedienungsanleitung für Whirlpool UMV1170LW (32 Seiten) kostenlos online; sie gehört zur Kategorie Mikrowelle. Dieses Handbuch wurde von 6 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 3.5 Bewertungen. Hast du eine Frage zu Whirlpool UMV1170LW oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/32
MICROWAVE HOOD COMBINATION
INSTALLATION INSTRUCTIONS
This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See the “Installation
Requirements” section for further notes.
These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration
in these installation instructions.
Table of Contents
MICROWAVE HOOD COMBINATION SAFETY
W11611725A
MICROWAVE HOOD COMBINATION SAFETY ............................1
INSTALLATION REQUIREMENTS ................................................. 2
Tools and Parts .............................................................................2
Separate Cardboard Template ..................................................... 2
Location Requirements ................................................................2
Electrical Requirements ...............................................................3
INSTALLATION INSTRUCTIONS ................................................... 4
Remove Mounting Plate ............................................................... 4
Rotate Blower Motor ....................................................................4
Locate Wall Stud(s) ......................................................................7
Mark Rear Wall .............................................................................7
Drill Holes in Rear Wall .................................................................8
Attach Mounting Plate to Wall .....................................................8
Prepare Upper Cabinet ................................................................9
Install Damper Assembly (for wall venting only) ....................10
Install the Microwave Oven ........................................................10
Complete Installation .................................................................11
VENTING DESIGN SPECIFICATIONS ........................................12
ASSISTANCE ................................................................................14
Replacement Parts .....................................................................14
Accessories ................................................................................14
2
INSTALLATION REQUIREMENTS
Tools and Parts
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
■ Measuring tape
■ Pencil
■ Masking tape or
thumbtacks
■ Scissors
■ No. 2 Phillips screwdriver
■ No. 3 Phillips screwdriver
for 1/4 - 20 x 3" (7.6 cm)
bolts
■ Drill
■ 3/16" (5 mm), 3/8" (1 cm),
5/8" (1.6 cm) drill bits
■ 3/4" (1.9 cm) hole saw
■ Diagonal wire cutting pliers
■ Stud nder
■ 7⁄16" (1.1 cm) socket
wrench (or box wrench) for
1/4" x 2" (6.4 mm x 5.1cm)
lag screws
■ 1
1
/
2
" (3.8 cm) diameter hole
drill bit for wood or metal
cabinet
■ Keyhole saw
■ Caulking gun and
weatherproof caulking
compound
■ Duct tape
Parts Needed
For information on reordering, see the “Replacement Parts”
section.
NOTE: The hardware items listed here are for wood studs.
For other types of wall structures, be sure to use appropriate
fasteners.
NOTE: Depending on model, aluminum grease lter and
charcoal lter may be combined.
Materials Needed
■ Standard ttings for wall or roof venting. See the “Venting
Design Specications” section.
Separate Cardboard Template
The wall template and upper cabinet template is embedded in
the backside of the carton box. They are used as a rear wall
template and upper cabinet template.
1. Cut along the dotted line to separate the cardboard template
from the backside of the carton box.
2. Set the cardboard template to the side and refer to it during
the “Mark Rear Wall” and “Prepare Upper Cabinet” parts of
installation.
Location Requirements
Check the opening where the microwave oven will be installed.
The location must provide:
■ Minimum installation dimensions. See the “Installation
Dimensions” illustration.
■ Minimum one 2" x 4" (5.1 x 10.2 cm) wood wall stud and
minimum 3/8" (1 cm) thickness drywall or plaster/lath within
cabinet opening.
■ Support for weight of 150 lbs (68 kg) which includes
microwave oven and items placed inside the microwave
oven and upper cabinet.
■ Grounded electrical outlet inside upper cabinet. See the
“Electrical Requirements” section.
NOTES:
■ If installing the microwave oven near a left sidewall, make
sure there is at least 6" (15.2 cm) of clearance between the
wall and the microwave oven so that the door can open fully.
■ Some models have a pocket handle. If installing the
microwave near a right side wall, make sure there is at least
3" (7.6 cm) of clearance between wall and microwave oven
so you can grab the handle integrated inside the door.
■ Some cabinet and building materials are not designed to
withstand the heat produced by the microwave oven for
cooking. Check with your builder or cabinet supplier to make
sure that the materials used will not discolor, delaminate, or
sustain other damages.
Special Requirements
For Wall Venting Installation Only:
■ Cutout must be free of any obstructions so that the vent t
properly and the damper blade opens freely and fully.
For Roof Venting Installation Only:
■ If you are using a rectangular-to-round transition piece, the
3" (7.6 cm) clearance needs to exist above the microwave
oven so that the damper blade can open freely and fully.
See “Rectangular to Round Transition” illustration in the
“Venting Design Specications” section.
A
B
C
DEF
G
H
A. 3/16 - 24 x 3" round-head
bolts (2)
B. 1/4 - 20 x 3" at-head bolts (2)
C. Washers (2)
D. 3/16" toggle nuts (2)
E. 1/4" x 2" lag screws (2)
F. #6 x 3/8" Sheet metal screws (2)
G. Power supply cord bushing (1)
H. Damper assembly (for wall or
roof venting)
Not Shown:
■ Mounting plate (attached to
back of microwave oven)
■ Cardboard template (part of
packaging)
■ Aluminum grease lters
■ Charcoal lters (Depending
on model, charcoal lters may
not be included. See User
Instructions.)
12 1/2" (31,8 cm)
6 1/4
"
(15,9 cm
)
5 3/4"
(14,6 cm)
4 3/4
"
(12,1 cm)
10
"
(25,4 cm)
12 1/2" (31,8 cm)
7 1/2
" (19,1 cm)
6 3/8" (16,2 cm)
15 5/8
"
(39,71 cm)
15 5/8"
(39,71 cm)
14 1/6" (35.96 cm)
14 1/6"
(35.96 cm)
G
D
E
A
B
F
12 1/2
"
(31.8 cm)
6 1/4
"
(15.9 cm
)
5 3/4
"
(14.6 cm)
4 3/4
"
(12.1 cm)
10
"
(25.4 cm)
12 1/2
"
(31.8 cm)
7 1/2
"
(19.1 cm)
6 3/8
"
(16.2 cm)
15 5/8
"
(39.71 cm)
15 5/8
"
(39.71 cm)
14 1/6
"
(35.96 cm)
14 1/6
"
(35.96 cm)
G
D
D
E
A
B
F
B
A
A. Backside of the carton box
B. Cardboard template (including Rear Wall template and Upper
Cabinet template)
Produktspezifikationen
| Marke: | Whirlpool |
| Kategorie: | Mikrowelle |
| Modell: | UMV1170LW |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Whirlpool UMV1170LW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mikrowelle Whirlpool
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
Bedienungsanleitung Mikrowelle
- WLA
- PKM
- Commercial Chef
- NABO
- Breville
- Zanker
- Fakir
- Grundig
- Porter & Charles
- Kunft
- Quigg
- Baumatic
- Jocel
- Privileg
- Nordmende
Neueste Bedienungsanleitung für -Kategorien-
20 Juni 2025
20 Juni 2025
20 Juni 2025
19 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025