Whirlpool WFW5720RSIL Bedienungsanleitung
Whirlpool
Waschmaschine
WFW5720RSIL
Lies die bedienungsanleitung für Whirlpool WFW5720RSIL (8 Seiten) kostenlos online; sie gehört zur Kategorie Waschmaschine. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Whirlpool WFW5720RSIL oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
1
IMPORTANT TO BE READ AND OBSERVED:
Before using the appliance, read these safety instructions. Keep them nearby for future reference. These instructions and the
appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to
observe these safety instructions, for inappropriate use of the appliance or incorrect setting of controls.
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
NOTE: For Operating Instructions, refer to the Quick Start Guide provided with the product and online documentation. How to access
the online documentation is located on the Quick Start Guide along with QR code on the product for future reference.
W11646252C
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions,
including the following:
■Read all instructions before using the appliance.
■Do not wash articles that have been previously cleaned in,
washed in, soaked in, or spotted with gasoline, dry-cleaning
solvents, or other ammable or explosive substances, as
they give off vapors that could ignite or explode.
■Do not add gasoline, dry-cleaning solvents, or other
ammable or explosive substances to the wash water. These
substances give off vapors that could ignite or explode.
■Under certain conditions, hydrogen gas may be produced
in a hot-water system that has not been used for 2 weeks
or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water
system has not been used for such a period, before using a
washing machine, turn on all hot-water faucets and let the
water ow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is ammable, do
not smoke or use an open ame during this time.
■Do not allow children to play on or in the appliance. Close
supervision of children is necessary when the appliance is
used near children.
■Before the appliance is removed from service or discarded,
remove the door.
■Do not reach into the appliance if the tub or agitator is
moving.
■Do not install or store this appliance where it will be exposed
to the weather.
■Do not tamper with controls. Do not repair or replace
any part of the appliance or attempt any servicing unless
specically recommended in the user maintenance
instructions or in published user-repair instructions that you
understand and have the skills to carry out.
■Do not use replacement parts that have not been
recommended by the manufacturer (e.g. parts made at
home using a 3D printer).
■See the Installation Instructions for grounding requirements
and installation.
SAVE THESE INSTRUCTIONS
WARNING
Certain Internal parts are intentionally not grounded and may present a risk of electrical shock only during servicing.
Service personnel – Do not contact any component that is not an integral part of the frame or metal cabinet
SAFETY AND INSTALLATION INSTRUCTIONS
2
GROUNDING INSTRUCTIONS
For a grounded, cord-connected appliance:
This appliance must be grounded. In the event of a malfunction
or breakdown, grounding will reduce the risk of electric shock
by providing a path of least resistance for electric current. This
appliance is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and
ordinances.
WARNING: Improper connection of the equipment grounding
conductor can result in a risk of electric shock. Check with a
qualied electrician or service technician if you are in doubt as
to whether the appliance is properly grounded. Do not modify
the plug provided with the appliance: if it will not t the outlet,
have a proper outlet installed by a qualied electrician.
SAVE THESE INSTRUCTIONS
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
ELECTRICAL REQUIREMENTS
INSTALLATION REQUIREMENTS
WARNING
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
MINIMUM CLOSET CLEARANCES
CONNECT INLET HOSES
Attach hot water hoses to hot water inlet valve and cold water
hoses to cold water inlet valve. Do not overtighten hose or use
tape or sealants on valve. Damage to the valves or property can
result.
INSTALLATION INSTRUCTIONS
DRAIN SYSTEM
IMPORTANT: Make sure to attach drain hose to product. Insert
no more than 4.5" (114 mm) of drain hose inside standpipe, and
secure drain hose. For more information, refer to the Installation
Instructions online.
WARNING: To reduce the risk of re, electric shock, or injury to
persons, read the Installation, User Maintenance and Operating
Instructions online, before installing this appliance.
The following requirements are provided as a supplemental
reference only. These requirements are not intended to replace
the Installation Instructions.
To access the full Installation, User Maintenance and Operating
Instructions online, refer to the Quick Start Guide provided with
the product.
3"
(76 mm)
3"
(76 mm)
24 in
2
(155 cm
2
)
48 in
2
(310 cm
2
)
20
(508 mm)
1"
(25 mm)
1"
(25 mm)
5"
(127 mm)
"
14" maximum
(356 mm)
A 120 V, 60 Hz AC only, 15 A or 20 A, fused electrical supply is
required. Plug into a grounded 3 prong outlet.
3
WASHER MAINTENANCE AND
CARE
WATER INLET HOSES
Replace inlet hoses after 5 years of use to reduce the risk of hose
failure. Periodically inspect and replace inlet hoses if bulges,
kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses:
■Mark the date of replacement on the label with a permanent
marker.
■Check that the old washers are not stuck on the appliance
inlet valves.
■Use new washers in the new inlet hoses to ensure a proper
seal.
NOTE: Do not use old hoses. Property damage can result. This
appliance may not include inlet hoses. See online installation
instructions for more information.
WASHER CARE
Recommendations to Help Keep Your Washer Clean and
Performing at its Best:
1. Always use High Efciency (HE) detergents and follow the
HE detergent manufacturer’s instructions regarding the
amount of HE detergent to use. Do not use more than the
recommended amount because that may increase the rate
at which detergent and soil residue accumulate inside your
washer, which in turn may result in undesirable odor.
2. Use warm and hot wash water settings sometimes (not
exclusively cold water washes), because they do a better
job of controlling the rate at which soils and detergent
accumulate.
3. Always leave the washer lid/door open between uses to help
dry out the washer and avoid the buildup of odor-causing
residue.
FOR FRONT LOAD MODELS ONLY:
4. Periodically clean residue from all interior surfaces of the
window. For better care, wipe the entire inside of the door
with a damp cloth.
5. Always follow door seal maintenance instructions to clean
the door seal. Go online for complete instructions.
NON-USE AND VACATION CARE:
Operate your washer only when you are home. If moving,
or not using your washer for a period of time, follow these
steps:
1. Unplug or disconnect power to the washer.
2. Turn off the water supply to the washer, to avoid ooding
due to water pressure surge.
HELPFUL TIP: Attach a reminder note to the washer to turn
the water back on before washer’s next use.
3. Clean the Dispensers. Not all models are equipped with
dispensers. If your model has dispensers, refer to the
Cleaning Dispensers section online.
WINTER STORAGE CARE
IMPORTANT: To avoid damage, install and store washer where it
will not freeze. Because some water may stay in hoses, freezing
can damage the washer. If storing or moving during
freezing weather, winterize your washer.
To winterize washer:
1. Shut off both water faucets; disconnect and drain water inlet
hoses.
HELPFUL TIP: Attach a reminder note to the washer to turn
the water back on before washer’s next use.
2. Put 1 quart (1 L) of R.V. type antifreeze in basket and run
washer on Drain/Spin cycle for about 30 seconds to mix
antifreeze and remaining water.
3. Unplug washer or disconnect power.
TRANSPORTING YOUR WASHER
1. Shut off both water faucets. Disconnect and drain water
inlet hoses.
2. If washer will be moved during freezing weather, follow
“Winter Storage Care” directions before moving.
3. Disconnect drain hose from drain system and from back of
washer.
4. Unplug power cord.
5. Place inlet hoses and drain hose inside washer basket.
6. Bundle power cord with a rubber band or cable tie to keep it
from hanging to the ground.
FOR FRONT LOAD MODELS ONLY:
IMPORTANT: Call for service to install new transport bolts.
Do not reuse transport bolts. Washer must be transported
in the upright position. To avoid structural damage to your
washer, it must be properly set up for relocation by a certied
technician.
7. FOR TOP LOAD MODELS ONLY: Place packing tray from
original shipping materials back inside washer. If you do
not have packing tray, place heavy blankets or towels into
basket opening. Close lid and place tape over lid and down
front of washer. Keep lid taped until washer is placed in new
location. Transport washer in upright position.
REINSTALLING/USING WASHER AGAIN
To reinstall washer after non-use, vacation, winter storage, or
moving:
1. Refer to Installation Instructions online for more information
to locate, level, and connect the washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet hoses.
Turn on both water faucets.
2. Plug into a grounded 3-prong outlet or reconnect power.
3. Run the washer through a full cycle (Clean Washer cycle
if preferred, if equipped) to clean washer and remove
antifreeze, if used. Use only HE (High Efciency) detergent.
Use 1/2 the manufacturer’s recommended amount for a
medium-size load.
Produktspezifikationen
| Marke: | Whirlpool |
| Kategorie: | Waschmaschine |
| Modell: | WFW5720RSIL |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Whirlpool WFW5720RSIL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Waschmaschine Whirlpool
27 August 2025
27 August 2025
27 August 2025
27 August 2025
27 August 2025
27 August 2025
27 August 2025
27 August 2025
14 August 2025
13 August 2025
Bedienungsanleitung Waschmaschine
- Black And Decker
- Fisher & Paykel
- Bompani
- Nedis
- Electrolux
- Akai
- Manta
- Ocean
- AEG-Electrolux
- Flavel
- Ursus Trotter
- Tesla
- Patriot
- Samsung
- Hiberg
Neueste Bedienungsanleitung für -Kategorien-
28 August 2025
28 August 2025
28 August 2025
28 August 2025
27 August 2025
27 August 2025
27 August 2025
27 August 2025
27 August 2025
27 August 2025