Whirlpool WH7IPC15BM60 Bedienungsanleitung
Seiten 72 Spülmaschine
Lies die Bedienungsanleitung für Whirlpool WH7IPC15BM60 kostenlos online oder lade das PDF herunter. 31 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
EN
Quick Guide
1
SETTING MENU
1. Switch on the appliance by pressing the ON-OFF button.
2. Hold the Settings (Half Load ) button for 3 seconds, until you hear
a beep and the display shows „SEt”.
3. After one second the rst available setting (letter „h”) will be displayed.
4. Press PREVIOUS/NEXT to scroll through the list of available settings
(see table below), then press START/Pause to view and change the
value of the currently selected setting.
5. Press PREVIOUS/NEXT to change the value, then press START/Pause
to save the new value and return to the main menu.
6. To change another setting, repeat points 4 and 5.
7. Press ON-OFF or wait 30 seconds to exit the menu.
LETTER
SETTING
VALUES
(Default - in bold)*
Cycle Counter - number of washing cycles
carried out by the dishwasher.
Eg. 25 cycles: 25;
Eg. 13.947 cycles:
13_947
(scrolling
for 3 times)
Water Hardness Level
(see “SETTING THE WATER HARDNESS”
and “WATER HARDNESS TABLE”)
1 | 2 | 3 | 4 | 5
Rinse Aid Level
(see “ADJUSTING THE DOSAGE OF RINSE AID”)
0 | 1 | 2 | 3 | 4 | 5
NaturalDry
(see “OPTIONS AND FUNCTIONS”)
“1” = On, “0” = O
1 | 0
Sound
“1” = On, “0” = O
1 | 0
Factory Settings - press START/Pause to re-
store to the factory default all the values of the
settings included in the settings menu.
-
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine’s functional components.
The salt reservoir is located in the lower part of the dishwasher (under the
lower rack on the left side).
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
• Salt must be lled when the SALT REFILL indicator light on the control
panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Position the funnel (see gure) and ll the salt reservoir
right up to its edge (approximately 0,5 kg); it is not un-
usual for alittle water to leak out.
3. Only the rst time you do this: ll the salt reservoir
with water.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair).
Run aprogram every time as soon as you completed relling the salt
reservoir to avoid corrosion.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently pre-
venting scale buildup on the heater, contributing also to better cleaning ef-
ciency. This system regenerates itself with salt, therefore it is required
to rell the salt container when empty.
The frequency of regeneration depends on the water hardness level setting
- regeneration takes place once per 4-6 Eco cycles with the water hardness
level set to 3. The regeneration process occurs at the beginning of the cycle
with additional fresh water.
• Single regeneration consumes ~3 L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.
A
B
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dis-
penser Ashould be lled when the RINSE AID REFILL
indicator light in the control panel is lit.
1. Open the dispenser B by pressing and pulling up
the tab on the lid.
2. Pour in the rinse aid (max. 110 ml), making sure it
does not overow from the dispenser. If this hap-
pens, clean the spill immediately with adry cloth.
3. Press the lid down until you hear aclick to close it.
NEVER pour the rinse aid directly into the appli-
ance tub.
D
C
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening
device C. Introduce the detergent into the dry dis-
penser D only. Place the amount of detergent for
pre-washing directly inside the tub.
1. When measuring out the detergent refer to the
mentioned earlier information to add the proper
quantity. Inside the dispenser D, there are indica-
tions to help the detergent dosing.
2. Remove detergent residues from the edges of the dispenser and close
the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until the closing
device is secured in place.
The detergent dispenser automatically opens up at the right time accord-
ing to the program.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
CONTROL PANEL
FIRST TIME USE
More information in the Daily Reference Guide on website.
1. ON-OFF/Reset button with indicator light
2. PREVIOUSprogram button
3. NEXTprogram button
4. FAVOURITEprogram button
with indicator light
5. Salt reservoir empty indicator light
6. Rinse Aid reservoir empty indicator light
7. DESCALE indicator light
8. ClosedWater Tap indicator light
9. Display
10. Program number and remaining time indicator
11. Power Clean®option button with indicator light
12. Half Loadoption button with indicator light/ Settings - 3 sec. press
13. Extra Dryoption button with indicator light
14. Delayoption button with indicator light
15. START/Pause button with indicator light
PLEASE SCAN THE
QR CODE ON YOUR
APPLIANCE IN
ORDER TO HAVE
MORE DETAILED
INFORMATION
Before using the appliance carefully read Safety and Installation Instructions.
After installation, please remember to remove all transport protection parts from
the dishwasher.
THANK YOU FOR BUYING AWHIRLPOOL PRODUCT.
In order to receive amore complete assistance, please
register your appliance on: www.whirlpool.eu/register
W11553946 panel 2023-01-17
W11572189 button R 2021-10-01
W11572083 button L 2022-02-15
W11569647 display 2023-02-17
12345678910
111213
14
15
P
3 sec.
21
65°
345678910
50°
Eco
65°
A
55°
A
50°
A
45°
65°
SELF CLEAN
Alle Fehlercodes Whirlpool Spülmaschine 9 Fehlercodes aus 7 Bedienungsanleitungen, mit Bedeutung.
Produktspezifikationen
| Marke: | Whirlpool |
| Kategorie: | Spülmaschine |
| Modell: | WH7IPC15BM60 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Whirlpool WH7IPC15BM60 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Spülmaschine Whirlpool
Whirlpool WUO 3O33 D Bedienungsanleitung Whirlpool W7F HP33 X Bedienungsanleitung Whirlpool W2F HD624 X Bedienungsanleitung Whirlpool WFO 3T133 PF X Bedienungsanleitung Whirlpool W2I HD524 AS Bedienungsanleitung Whirlpool WH8IPB14AM6L0 Bedienungsanleitung Whirlpool WIO 3P33 PL Bedienungsanleitung Whirlpool WIC 3C26 N Bedienungsanleitung
Alle Whirlpool Spülmaschine Bedienungsanleitungen
Beliebt in Spülmaschine
Whirlpool WFC3B16X Bedienungsanleitung Whirlpool ADG 110 Bedienungsanleitung Whirlpool ADG 4620 IX Bedienungsanleitung
Bedienungsanleitung Spülmaschine
Neueste Bedienungsanleitungen für Spülmaschine
Siemens SN615X03EE Bedienungsanleitung Siemens SN63EX22BN Bedienungsanleitung AEG FSE74517P Bedienungsanleitung ATAG VA9511RT Bedienungsanleitung Asko DSD6348D Bedienungsanleitung Nordmende DW67SL Bedienungsanleitung AEG FBB54605ZW Bedienungsanleitung Amica DIM62E6EBqO Bedienungsanleitung Frigidaire PDSH4816BF Bedienungsanleitung AEG FSE77BERLIN Bedienungsanleitung