Whirlwind Director Bedienungsanleitung


Lies die bedienungsanleitung für Whirlwind Director (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 69 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 35 Bewertungen. Hast du eine Frage zu Whirlwind Director oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/3
OUTPUT (1/4” jack)
A “Y” connection or “loop through” from the input.
OUTPUT (XLR jack)
A male XLR, provides a balanced low impedance (150 Ohms) signal for connection to
balanced, low-Z equipment (mixing console, workstation, etc.)
INST/AMP (Switch)
Most instruments will operate properly when set to the INST position. Set to the AMP position
for use with very “hot” instrument signals or when connecting the Director to the speaker output
of an amplifier.
FLAT/FILTER (Switch)
Engages a high-cut filter when used in the FILTER position to reduce hiss and noise. This
filter is functional only when the INST/AMP switch is in the AMP position. Filter is bypassed
when set to the FLAT position.
GND/LIFT (Switch)
Disconnects the ground between the input and the XLR output when set to the LIFT position
to help eliminate hum. Ground remains connected when set to the GND position.
This product is warranted to be free of defects in materials or workmanship to the original
purchaser for a period of 3 years from the date of purchase. Should warranty service be
required, return the unit postage paid along with the original sales receipt to:
Whirlwind Music Dist., Inc.
99 Ling Road
Rochester NY 14612
Whirlwind will, at its option, repair or replace the unit. This warranty does not cover damage
resulting from abuse, unauthorized modifications or use of the product in unintended
applications.


Produktspezifikationen

Marke: Whirlwind
Kategorie: Nicht kategorisiert
Modell: Director

Brauchst du Hilfe?

Wenn Sie Hilfe mit Whirlwind Director benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten