Williams Sound CHG 520 Bedienungsanleitung

Lies die bedienungsanleitung für Williams Sound CHG 520 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 15 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 8 Bewertungen. Hast du eine Frage zu Williams Sound CHG 520 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

CHG 520

5-Unit Drop-In Battery Charger

USER MANUAL

CHG 520 Front and Rear View

Setup Instructions

1. Plug the DC power connector into the rear of the CHG 520.

2. Plug the power supply into an AC wall outlet.

3. Insert the Receiver into the charging slot. The receivers must be facing forward to make contact

with the charging contacts. The LED indicator on top of the IR RX20 receiver will illuminate red

when charging and will change to green when charging is complete.

4. It is safe to leave the receivers in the charger even after the batteries are fully charged. However,

we do not recommend leaving receivers in the charger for a prolonged period of time.

5. A piggy-back cable is available, which can be used to connect up to three CHG 520 chargers to

one power supply.

If No LED’s Light Up:

1. Verify that the power supply is plugged into a wall outlet.

2. Verify the wall outlet has power (no tripped circuit breaker, etc).

3. Verify the receiver is turned off.

4. Verify that all receivers are facing front in the charger. If charging, the indicator LED will illuminate

red. If fully charged, it should illuminate green.

Recycling Instructions

Help Williams AV protect the environment! Please take the time to dispose of your equipment

properly.

Please Recycle

Please do NOT dispose of your equipment in the household trash. Please take the equipment to

a electronics recycling center for proper disposal.

1

Produktspezifikationen