WMD Spectrum Bedienungsanleitung
WMD
Nicht kategorisiert
Spectrum
Lies die bedienungsanleitung für WMD Spectrum (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 16.5 Bewertungen. Hast du eine Frage zu WMD Spectrum oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
FT
PW FM
PWM
SAW
TRI
SINE
S/P
PLS
COARSE TUNE CONTROL
Wide range control of the VCO frequency.
FINE TUNE CONTROL
Narrow range control for ne tuning the VCO frequency.
PULSE WIDTH CONTROL
Controls the pulse width of the PULSE and CRP/ESP waveforms.
PULSE WIDTH CV ATTENUATOR
Adjusts the control voltage (CV) level or depth PWM of signals applied the
input.
SPECTRUM is a precision, saw-core VCO with eight possible waveforms (six simultaneous
outputs), an eight octave switch, LFO mode and FM mode select with attenuation. In addition to
the standard waveforms; (sine, pulse, triangle and saw), SPECTRUM features two selectable
saw/pulse hybrid waveforms and two selectable sub-octave waveforms with variable range.
Additional features include pulse width modulation with CV and attenuation, hard sync and
panel accessible 1V/OCT calibration.
PULSE WIDTH MODULATION INPUT
Apply audio or control voltage signals here to . modulate the pulse width
The eect is dependent on the relative PULSE WIDTH CONTROL and
ATTENUATOR settings.
SQUARE/ PULSE WAVE OUTPUT
PULSE wave output. Change the width/shape of the pulse with the PULSE
WIDTH control and PULSE WIDTH MODULATION input.
SINE WAVE OUTPUT
Very high purity sine wave output.
TRIANGLE WAVE OUTPUT
Symmetrical triangle out.
SAWTOOTH WAVE OUTPUT
Falling edge ramp wave - also known as a sawtooth wave.
PANEL CONTROL
LED INDICATOR
INPUT
OUTPUT
MODE SELECTOR
COLOR KEY LEGEND
CT
PW
CV
FM
SYNC
SUB
SFM
CT
FT
PW
PW
CV
FM FREQUENCY MODULATION CV ATTENUATOR
Adjusts the control voltage (CV) level or depth FM input of signals applied the .
PWM
FM FREQUENCY MODULATION INPUT
Apply audio or control voltage signals here to modulate the frequency of
the VCO. Use the FM CV ATTENUATOR to adjust the depth of modulation.
The response can be either linear or exponential - see operation modes on
page two for more information.
SCALED (1V/OCT) FM INPUT
This is the direct input for, but not limited to, controlling the VCO frequen-
cy with keyboard control voltages, midi to CV converters, sequencers and
other devices. This is an exponential CV input.
HARD SYNC INPUT
Apply pulsed or falling edge sawtooth waveforms to the SYNC input to
slave the oscillator to the applied signal frequency. The hard sync
method causes the slaved VCO to - adding harmonic reset abruptly
content to the output waveform.
SYNC
SFM
PLS
SAW/PULSE HYBRID WAVE OUTPUT
Center-Ramp-Pulse and Edge-Saw-Pulse wave outputs. Change the
width/shape of both waveforms with the PULSE WIDTH control and
PULSE WIDTH MODULATION input. Only one wave type can be selected
at a time. See operation modes on page two for details.
S/P
SINE
TRI
SAW
SUB OCTAVE OUTPUT
Outputs a sub octave sawtooth or square wave that is one or two octaves
below the main oscillator frequency. See operation modes on page two for
waveform and octave selection.
SUB
Produktspezifikationen
| Marke: | WMD |
| Kategorie: | Nicht kategorisiert |
| Modell: | Spectrum |
Brauchst du Hilfe?
Wenn Sie Hilfe mit WMD Spectrum benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert WMD
31 August 2024
22 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
Bedienungsanleitung Nicht kategorisiert
- NEP
- Alto-Shaam
- F-Secure
- NordicTrack
- Paraclipse
- Oreg
- Alfen
- Korg
- Energizer
- OSEE
- BMW
- TK Audio
- RetroSound
- Paingone
- E-Power
Neueste Bedienungsanleitung für -Kategorien-
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026