Woodland Scenics WJP5701 Bedienungsanleitung
Woodland Scenics Nicht kategorisiert WJP5701
Lies die bedienungsanleitung für Woodland Scenics WJP5701 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 9 Bewertungen. Hast du eine Frage zu Woodland Scenics WJP5701 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2

INSTRUCTIONS
BEFORE YOU PROCEED
Read through instruction booklet entirely. Comply with all operating instructions. Failure to follow instructions could result in
damage to the product or personal injury. Do not modify or tamper with any electronic components. Combine products from
the Just Plug Lighting System only, unless otherwise instructed. Save these instructions.
GETTING STARTED
The Just Plug Lighting System is made up of . This simple connection system makes it quick and Ports, Plugs and Cables
easy to light one building or an entire city.
How to Connect a Plug to a Port
Align locking tabs on Plug with front of Light or Expansion Hub. Insert Plug into Hub Port until locking tabs click into place.
(Fig. 1)
How to Remove a Plug from a Port
Grasp top edge of Plug and pull firmly.
LIGHTS & HUB SET / LIGHT HUB
Light Hubs supply power to Just Plug LED Lights.
• TopowerLightHub,insertPowerSupply(JP5770)plugintoPort(orusea16VACtrainpowerpack,).POWER INFig. 5
• DoremoveCTRLPortPlug(unlessusingAuxiliarySwitch(JP5725)orconnectingtoDCC).NOT
• PlugLEDLights(JP5736-JP5749,JP5754,JP5755)intoincludestwoStick-OnLights.ToLIGHT Ports. Lights & Hub Set
secure Lights in building, remove release paper from back of LED and stick on where desired.
• RotateDimmerControlstoadjustlightbrightness(adjustsfromverybrighttooff).
• UsededicatedspacesonfrontofHubtolabelaccordingtoyourlightingconfiguration.
• TomountHub,useincludedTapeorScrews.
EXPANSION HUB
Connect Light Hubs to Expansion Hub to expand your lighting system.
•TopowerExpansionHub,insertPowerSupply(JP5770)plugintoPort(orusea16VACtrainpowerpack, ).POWER INFig. 5
• DoremoveCTRLPortPlug(unlessusingAuxiliarySwitch(JP5725)orconnectingtoDCC).NOT
• UseincludedConnectingCablestoconnecttoLightHubs(Fig. 2)(Figs. 3, another Expansion Hub and 4), train power
pack . (Fig. 5)(Fig. 6) or DCC relay unit
• UsededicatedspacesonfrontofHubtolabelaccordingtoyourlighting
configuration.
• TomountHub,useincludedTapeorScrews.
CONNECTING HUBS TOGETHER
Use Connecting Cables (included with Expansion Hub)
Connect Light Hub to Expansion Hub
Insert Connecting Cable Plug into Expansion Hub Port and opposite HUB
Plug into Light Hub Port POWER IN(Fig. 2).
Connect Expansion Hub to Expansion Hub
Insert Connecting Cable Plug into Port on powered POWER OUT
Expansion Hub. Insert opposite Plug into POWER INPortonadd-on
ExpansionHub(Fig. 3)(Fig. 4). Keep expanding your lighting system .
Power Hubs from a Train Power Pack
Cut off one Connecting Cable Plug with wire cutters and strip
approximately1" of wire. Connect bare wires to the accessory terminals
ona16VACpowerpack.InsertPlugonotherendofConnectingCable
into Hub Port. POWER IN(Fig. 5)
Control Just Plug Lighting System with DCC
Cut off one Connecting Cable Plug with wire cutters and strip
approximately1 ofwire.ConnectbarewirestoDCCrelayunit(follow"
DCCmanufacturerinstructionsforproperinstallationofwires).Insert
Plug on other end of Connecting Cable into Hub Port.CTRL (Fig. 6)
1 2 34
1
Power
Supply
EXPANSION HUB
Connecting Cable
CTRL
Port
Plug
HUB
Ports
Ports
Locking
Tabs
Plug
Fig. 1
1 2 34
1
5
2
1a 1b1c1d
1
2a 2b2c 2d
2
3a 3b 3c 3d
3
4a 4b4c 4d
4
5a 5b5c 5d
5
Fig. 4
Keep
Expanding
1a 1b1c 1d
1
Power
Supply
LED
Stick-On
(orNano)
CTRL
Port
Plug
Light Ports
Dimmer Controls
LIGHT HUB
Fig. 2
Connecting Cable
Power
Supply
Cable
Fig. 3
Connecting Cable
Power
Supply
Cable
Fig. 5
Train
Power
Pack
Connecting
Cable
Fig. 6
DCC
RelayUnit
Connecting
Cable
LIGHTS HUB - JP5701
WOODLAND SCENICS®PO Box 98, Linn Creek, MO 65052 • woodlandscenics.com
Combination Package Developed in USA Made in China G11 ©2014 O CORoHS Compliant
Model building item, not a toy! Not intended for children
under 14 years! / Modellbauartikel, kein Spielzeug! / Article de
modélisme. Ceci n’est pas un jouet. / Articolo di modellismo,
non è un giocattolo! / Artículo para modelismo ¡No es un
juguete! / Artigo para modelismo. Este artigo não é um
brinquedo! / Výrobek určený pro modeláře, nejedná se o
hračku! / Modelbouwartikel, geen speelgoed!
CAUTION: Do not look directly into LED lights when in operations.
Produktspezifikationen
| Marke: | Woodland Scenics |
| Kategorie: | Nicht kategorisiert |
| Modell: | WJP5701 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Woodland Scenics WJP5701 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Woodland Scenics
7 August 2024
Bedienungsanleitung Nicht kategorisiert
Neueste Bedienungsanleitung für -Kategorien-
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026