WowWee 1430 Groove Cube Bedienungsanleitung

Lies die bedienungsanleitung für WowWee 1430 Groove Cube (2 Seiten) kostenlos online; sie gehört zur Kategorie Spielzeug. Dieses Handbuch wurde von 45 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 23 Bewertungen. Hast du eine Frage zu WowWee 1430 Groove Cube oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Manufactured and distributed by

© 2014 WowWee Group Limited.

All Rights Reserved.

WowWee Group Limited.Energy Plaza, 301A-C, 92 Granville Road

T.S.T. East, Hong Kong

WowWee Canada Inc.3700 Saint-Patrick Street, Unit 206, Montreal

QC H4E 1A2, Canada

Customer Service: www.wowweezone.com

Assortment No.: 1430

Contents: 1 x Groove Cube™; 1 x USB Cable; 1 x Lanyard; 1 x Instruction Manual

The Groove Cube™ mini Bluetooth speaker is small in size, but a powerful multi-functional device. It supports Bluetooth music playing, Bluetooth handsfree

phone call functions, and comes with a lanyard and jack pin to attach to your device.

Features:

● Size 26.8 x 26.8 x 28.5mm [1.05 x 1.05 x 1.12 inches] • Proximity Alert Function: Once connected to a smart device, an alert will sound

● Bluetooth music playing if device exceeds speaker reception range

● Bluetooth handsfree phone call functions ● Lanyard and jack pin to attach to device

1430US01CBF_IML

INSTRUCTION MANUAL

EASY OPERATION

Groove Cube™Micro USB Cable

1. Push Button: Play/Pause/Answer Calls

● Press and hold the Push Button to power On/Off.

●Press the button to Pause when music is playing.

●Press the button to answer incoming calls when the device is

paired with a phone.

2. Microphone

3. Charge Indicator Light

●Flashing Red LED light indicates device is charging.

●Constant Red LED light indicates the device is fully charged.

4. Bluetooth Indicator Light:

●Rapid Flashing (2/s) Green LED light indicates that the speaker is

in Bluetooth Searching and Pairing Mode.

●Slow Flashing (1/s) Green LED light indicates that the phone is

successfully paired.

5. Speaker

6. Lanyard Hole

7. Micro USB Port (Power Input)

Pairing:

●Press and Hold the Push Button until you hear the start-up chime. The Green LED

light will be ashing rapidly (2/s).

● Switch on your Bluetooth device and wait until ‘Groove Cube’ shows up on your

screen. When ‘Groove Cube’ appears on your device, select and pair with the speaker.

●When the pairing is complete, you will hear a message and the Green LED light will

ash slowly (1/s).

● To turn OFF the speaker, Press and Hold the Push Button.

Precautions:

● Do not submerge the product in water.

● Keep speaker away from water and moisture - do not get it wet.

● Keep speaker away from any heat source.

● Adjust volume to avoid damaging your hearing.

Specifications:

●(Rated Power) 2W

●(Frequency Response) 180Hz-16kHZ

●(Distortion Factor) THD<1%

●(Signal-to-Noise Ratio) S/N≥90DB

●(Separation) ≥55dB

●(Speaker) 23mm; 4Ω 2W

●(Battery) Rechargeable Lithium-Polymer

3.7V/180mAh

Troubleshooting:

●Bluetooth cannot connect to device:

Conrm the speaker is ON and Bluetooth on your

device is turned ON.

●No Sound:

Check the volume control on the device connected.

● No Power:

Charge the speaker.

3

4

7

25

6

1

Charging:

●Plug the Micro USB cable into the USB port.

The Red LED light will start ashing to indicate

the device is charging.

● A Constant Red LED light indicates that

charging is complete.

Lanyard

™

Produktspezifikationen