Xsarius SG-3100 DiSEqC H-H Motor Bedienungsanleitung
Xsarius
Digitaler Receiver
SG-3100 DiSEqC H-H Motor
Lies die bedienungsanleitung für Xsarius SG-3100 DiSEqC H-H Motor (12 Seiten) kostenlos online; sie gehört zur Kategorie Digitaler Receiver. Dieses Handbuch wurde von 22 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 11.5 Bewertungen. Hast du eine Frage zu Xsarius SG-3100 DiSEqC H-H Motor oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12
Manual
High-end DiSEqC 1.2 satellite rotor
Xsarius SG-3100 DiSEqC H-H Mount
INSTALLING THE MOUNT
1.Assemble the H-H Mount as the following diagram.
2.Make sure the mounting tube indicates 0°.Otherwise, driver the mounting tube 2 to exact 0°
via the manual buttons on the bottom of the mount(the cable must be connected to the
receiver that is switched on).
3.Make sure the mounting pole is exactly vertical before installation.
4.Fix the H-H Mount onto the Mounting pole or stand and tighten the two U-screws 4 by the
clamp 6 and nut 5 evenly. Make sure there is no obstacle in the southern sky, such as a tree
or building.
1
ALIGNMENT OF THE MOUNT
1. Aiming TRUE SOUTH.
Attaching the Antenna Dish to the Mount. Make sure it is at the center of the mounting tube.
Rotate the mount together with the antenna toward TRUE SOUTH. You can nd the TRUE
SOUTH via the magnetic variation table and a compass that indicates the MAGNETIC
SOUTH.
2. Setting Elevation Angle.(A)
Adjust the motor elevation angle via the Inclinoneter or the Elevation / Latitude scale on both
sides of the Motor according to the Latitude of your position.
3. Setting Declination Angle.(B)
Find the Declination Angle by the attached ANGLE TABLE.
Set the Declination Angle by the scale on the antenna dish. The reading on the antenna scale
should be:
35°-DECLINATION ANGLE
4. Drive the antenna east and west via the manual buttons on the bottom of the Mount to check if
the reception arc is correct. If not , adjust the direction, elevation, and declination angle to nd the
best reception.
P.S. In order to have power to drive the antenna, please connect the Mount to the receiver or
interface box via coaxial cable rst.
2
Produktspezifikationen
| Marke: | Xsarius |
| Kategorie: | Digitaler Receiver |
| Modell: | SG-3100 DiSEqC H-H Motor |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Xsarius SG-3100 DiSEqC H-H Motor benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Digitaler Receiver Xsarius
24 August 2024
5 August 2024
4 August 2024
Bedienungsanleitung Digitaler Receiver
- TelSKY
- TV STAR
- ODYS
- Zolid
- UPC
- Delta
- Digittrade
- Silverline
- XS4ALL
- Telestar
- Humax
- Metronic
- Technicolor
- Megasat
- Arion
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
21 September 2024
18 September 2024
17 September 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024