XU1 XHT-450U Bedienungsanleitung

Lies die bedienungsanleitung für XU1 XHT-450U (2 Seiten) kostenlos online; sie gehört zur Kategorie Heckenschere. Dieses Handbuch wurde von 6 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 3.5 Bewertungen. Hast du eine Frage zu XU1 XHT-450U oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

SAFETY

INSTRUCTIONS

ALWAYS WEAR EYE AND

EAR PROTECTION

Hedge Trimmer Safety Warnings

General Power Tool Safety

Warnings

XHT-450U 1017

Original Instructions

XHT-450U

520W

Electric Hedge

Trimmer

2

1

Electrical safety

Using an extension lead

Description of symbols

Always use an approved extension lead suitable for

the power input of this tool. Before use, inspect the

extension lead for signs of damage, wear and ageing.

Replace the extension lead if damaged or defective.

When using an extension lead on a reel, always

unwind the lead completely. Use of an extension lead

not suitable for the power input of the tool or which is

damaged or defective may result in a risk of fire and

electric shock.

The power supply for this product should be

protected by a residual current device (rated at 30mA

or less). A residual current device reduces the risk of

electric shock.

If the supply cord of this power tool is damaged,

it must be replaced by a specially prepared cord

available through the service organization.

This tool is double insulated; therefore no

earth wire is required.

Before you connect the charger to the mains supply

make sure that the data on the rating plate are

identical to the mains data.

Do not expose the hedge trimmer to

rain or wet conditions.

If the cable is damaged or cut, pull

out the power plug from the mains

immediately.

Caution! - Read the operating instructions

to reduce the risk of inquiry.

Wear eye protection and ear plugs.

WARNING! Read all safety

warnings and all instructions. Failure

to follow the warnings and instructions may

result in electric shock, re and/or serious

injury.

Save all warnings and instructions

for future reference. The term “power

tool” in all of the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of

ammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while

operating a power tool. Distractions can cause you

to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodied plugs and

matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or

grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is

an increased risk of electric shock if your body is earthed

or grounded.

c. Do not expose power tools to rain or wet

conditions. Water entering a power tool will increase

the risk of electric shock.

d. Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil,

sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of

electric shock.

f. If operating a power tool in a damp location

is unavoidable, use a residual current

device (RCD) protected supply. Use of an RCD

reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and

use common sense when operating a power

tool. Do not use a power tool while you

are tired or under the inuence of drugs,

alcohol or medication.A moment of inattention

while operating power tools may result in serious

personal injury.

b. Use personal protective equipment. Always

wear eye protection. Protective equipment such as

dust mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

c. Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting to power source and/or battery

pack, picking up or carrying the tool. Carrying

power tools with your nger on the switch or energising

power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before

turning the power tool on.A wrench or a key left

attached to a rotating part of the power tool may result in

personal injury.

e. Do not overreach. Keep proper footing and

balance at all times. This enables better control of

the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust-related

hazards.

h) Do not let familiarity gained from

frequent use of tools allow you to become

complacent and ignore tool safety

principles.A careless action can cause severe injury

within a fraction of a second.

4. Power tool use and care

a. Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the rate for

which it was designed.

b. Do not use the power tool if the switch does

not turn it on and off.Any power tool that cannot

be controlled with the switch is dangerous and must be

repaired.

c. Disconnect the plug from the power

source and/or remove the battery pack,

if detachable, from the power tool before

making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting the

power tool accidentally.

d. Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

e. Maintain power tools and accessories.

Check for misalignment or binding of

moving parts, breakage of parts and any

other condition that may affect the power

tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g. Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to be

performed. Use of the power tool for operations

different from those intended could result in a hazardous

situation.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow for safe

handling and control of the tool in unexpected situations.

5. Service

a. Have your power tool serviced by a

qualied repair person using only identical

replacement parts. This will ensure that the safety

of the power tool is maintained.

Danger!

Sound and vibration

Sound and vibration values were measured in

accordance with EN 60745.

L

pA

Sound Pressure Level: 81.6dB(A)

K

pA

Uncertainty: 3 dB

L

WA

Sound Power Level: 101.6dB(A)

K

WA

Uncertainty: 3 dB

Wear ear-muffs.

The impact of noise can cause damage to hearing.

Total vibration values (vector sum of three directions)

determined in accordance with EN 60745.

Front handle

Vibration emission value ah = 6.214 m/s²

K uncertainty = 1.5 m/s²

Rear handle

Vibration emission value ah = 5.328 m/s²

K uncertainty = 1.5 m/s²

The specified vibration value was established in

accordance with a standardized testing method. It

may change according to how the electric equipment

is used and may exceed the specified value in

exceptional circumstances.

The specified vibration value can be used to compare

the equipment with other electric power tools.

The specified vibration value can be used for initial

assessment of a harmful effect.

SERVICE INFORMATION

Please note that the following parts of this product are

subject to normal or natural wear and that the following

parts are therefore also required for use as consumables.

* Not necessarily included in the scope of delivery!

CategoryExample

Wear parts*Blade guide, Carbon brushes,

Consumables*Blade

Missing parts

For EU countries only

Never place any electric power tools in your household

refuse.

To comply with European Directive 2012/19/EC

concerning old electric and electronic equipment and its

implementation in national laws, old electric power tools

have to be separated from other waste and disposed of

in an environment-friendly fashion, e.g. by taking to a

recycling depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to the

manufacturer, the owner of the electrical equipment

must make sure that the equipment is properly disposed

of if p1-he no longer wants to keep the equipment. The old

equipment can be returned to a suitable collection point

that will dispose of the equipment in accordance with the

national recycling and waste disposal regulations. This

does not apply to any accessories or aids without electrical

components supplied with the old equipment.

Subject to technical changes

XU1 Power tools

Telephone: GB: 0151 294 4488 / IRL: 1850 882711

Warning!

Wei Shao/ Product-ManagementWeichselgartner/General-Manager

explains the following conformity according to EU directives and norms for

the following product

Electric Hedge Trimmer XHT-450U (XU1)

2014/29/EU

2005/32/EC_2009/125/EC

2014/35/EU

2006/28/EC

X

2014/30/EU

2014/32/EU

2014/53/EC

2014/68/EU

90/396/EC_2009/142/EC

89/686/EC_96/58/EC

X

2011/65/EU

X

2006/42/EC

Annex IV

Notied Body:

Notied Body No.:

Reg. No.:

X

2000/14/EC_2005/88/EC

X

Annex V

Annex VI

Noise: measured L

WA

= 101,6 dB (A); guaranteed L

WA

= 105 dB (A)

P = 0,52 KW; L/Ø = 36 cm

Notied Body:

2012/46/EU

Emission No.:

Standard references: EN 60745-1; EN 60745-2-15;

EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3

Landau/Isar, den 27.09.2017

First CE: 17 Archive-File/Record: NAPR017673

Art.-No.: 30.002.03 I.-No.: 11017 Documents registrar: Alex Kurz

Subject to change without noticeWiesenweg 22, D-94405 Landau/Isar

ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar

3000203_11017_XHT_450U.indd 13502.10.2017 10:24:04

Caution!

Residual risks

Even if you use this electric power tool in

accordance with instructions, certain residual

risks cannot be rules out. The following hazards

may arise in connection with the equipment’s

construction and layout:

1. Lung damage if no suitable protective dust mask

is used.

2. Damage to hearing if no suitable ear protection is

used.

3. Health damage caused by hand-arm vibrations if

the equipment is used over a prolonged period or is

not properly guided and maintained.

SPARE PARTS

Spare parts can be ordered from the Special Orders Desk at

your local Bunnings Warehouse or Homebase store.

For further information, or any parts visit

www.ozito-diy.co.uk or contact Ozito Customer Service:

Great Britain: 0151 294 4488

Ireland: 1850 882711

E-mail: info@ozito-diy.co.uk

• Keep all parts of the body away from the cutter

blade. Do not remove cut material or hold material to

be cut when blades are moving. Make sure the switch

is off when clearing jammed material. A moment of

inattention while operating the hedge trimmer may

result in serious personal injury.

• Carry the hedge trimmer by the handle with the

cutter blade stopped.When transporting or storing

the hedge trimmer always fit the cutting device cover.

Proper handling of the hedge trimmer will reduce

possible personal injury from the cutter blades.

• Hold the power tool by insulated gripping surfaces

only, because the cutter blade may contact hidden

wiring. Cutter blades contacting a “live” wire may make

exposed metal parts of the power tool “live” and could

give the operator an electric shock.

• Keep the cable out of the cutting zone. During

operation the cable may be covered by hedges and cut

through by accident.

Please read this safety information and the directions for use

carefully and be sure to follow the instructions to the letter.

1. Always remove the power plug from the socket-outlet

before you perform any work on the hedge trimmer, e.g.

- repairing a damaged cable

- cleaning the blades

- troubleshooting

- cleaning and maintenance

or before leaving the tool unattended.

2. The hedge trimmer can cause serious injuries! Read the

directions for use carefully in order to acquaint yourself

with the correct way to handle, set up, service, start and

put down the machine. Familiarize yourself with all the

machine’s control elements and its proper use.

3. Always handle the hedge trimmer with both hands.

4. When working with the hedge trimmer, wear sturdy shoes

and make sure of your footing.

5. Never work with the hedge trimmer in the rain or on wet

hedges and never leave the hedge trimmer outdoors. The

hedge trimmer must not be used if it is wet.

6. We recommend that you wear safety goggles and ear-

muff s when working with the hedge trimmer.

7. Wear suitable working clothes such as rubber gloves and

non-slip shoes. Do not wear loose garments. Keep long

hair in a hairnet.

8. Avoid abnormal postures and make sure of your footing,

particularly when working on ladders and steps.

9. Keep the equipment at a suitable distance from your body

while working. Never attempt to remove cuttings with the

blade running or to hold material you want to cut. Always

switch off the equipment before attempting to remove

any jammed cuttings. A single moment of carelessness

when using the hedge trimmer can result in serious

injuries.

10. Make sure there are no other persons or animals within

your working area (radius of swing).

11. Carry the hedge trimmer only by its guide handle.

12. Keep the cable out of the cutting zone. During operation

the cable may be hidden in the hedge and be cut

through by accident.

13. Before you use the hedge trimmer, examine the power

cable for signs of damage and aging.

14. Use the hedge trimmer only when the power cable is in

good working order.

15. Do not remove the power plug from the socket-outlet

by pulling on the cable. Never carry the tool by its cable.

Take care not to damage the cable in any way.

16. Protect cables from heat, caustic fluids and sharp

edges. Replace damaged cables immediately.

17. Examine the cutting system regularly for signs of

damage and, if necessary, arrange for the hedge

trimmer to be professionally repaired by the ISC

Customer Service Center or a specialist workshop.

18. If the blades become jammed, e.g. due to thick

branches or the like, switch off and unplug the hedge

trimmer immediately. Only then are you to remove the

cause of the obstruction.

19. Keep the hedge trimmer in a dry place out of children’s

reach.

20. During transportation and storage of the hedge trimmer,

keep the blades covered at all times with the special

guard.

21. Take care not to overload the hedge trimmer and do not

use it on jobs for which it is not intended, i.e. you are

allowed to use the hedge trimmer only to cut hedges,

shrubs and perennials.

22. Use only cables and connectors approved for outdoor

use:

- power cable HO7RN-F 2x1.0 with integral two-plug

plug;

- extension cable HO7RN-F 3G1.5 with rain-water-

protected earthing-pin plug and earthing-contact

coupling.

- The use of a leakage-current or earth leakage

circuit-breaker is recommended for operating electric

tools. Ask your electrician!

23. The hedge trimmer requires regular inspection and

maintenance. Always replace damaged blades in

pairs. If the hedge trimmer suffers any damage from

impact (falling on hard ground etc.), have it checked

immediately by a specialist.

24. Look after your hedge trimmer carefully. Keep it clean

and sharp to ensure efficient and safe cutting. Follow

the maintenance and cleaning instructions.

25. The German Farmers Union, for example, prohibits the

use of electric hedge trimmers by persons aged 17 or

less. Persons aged 16 and above may only use electric

hedge trimmers if supervised by an adult.

26. Do not use the hedge trimmer with a damaged or

excessively worn cutting system.

27. Check your surroundings and take note of any potential

dangers which you may not be able hear due to the

machine’s noise.

28. Never try to work with an incomplete machine or a

machine with unapproved modifications.

29. It is advisable not to use the hedge trimmer when other

persons, and particularly children, are nearby.

30. Children are not allowed to use the hedge trimmer.

31. The machine may exceed 85 db (A) at the workplace.

The operator will require noise protection measures and

ear muff s if this is the case.

32. Always ensure that all the handles and safety equipment

is fitted when the hedge trimmer is in use.

33. Examine the hedge for any concealed objects, e.g. wire,

before you start your work.

34. This equipment is not designed to be used by people

(including children) with limited physical, sensory or

mental capacities or those with no experience and/

or knowledge unless they are supervised by a person

who is responsible for their safety or they have received

instructions from such a person in how to use the

equipment safely. Children must always be supervised

in order to ensure that they do not play with the

equipment.

35. The equipment should be operated via a residual current

protective device (RCD) with a trip current of no more

than 30 mA. Do not lose this safety information.

Do not lose this information.

Keep the noise emissions and vibrations to a

minimum.

•

Only use appliances which are in perfect working

order.

•

Service and clean the appliance regularly.

•

Adapt your working style to suit the appliance.

•

Do not overload the appliance.

•

Have the appliance serviced whenever necessary.

•

Switch the appliance off when it is not in use.

•

Wear protective gloves.

Produktspezifikationen