XU1 XMT-703U Bedienungsanleitung

Lies die bedienungsanleitung für XU1 XMT-703U (2 Seiten) kostenlos online; sie gehört zur Kategorie Multifunktionswerkzeug. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 16.5 Bewertungen. Hast du eine Frage zu XU1 XMT-703U oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

SAFETY

INSTRUCTIONS

ALWAYS WEAR EYE, FACE AND

EAR PROTECTION

When operating the tool

Electrical safety

Using an extension lead

Description of symbols

Additional Safety Instructions

for Multi Function Tools

Items Supplied

General Safety Instructions

for Electric Tools

XU1 Power tools

XMT-703U 0417

23

Check that the switch is in the “OFF” position

before connecting to the power supply. Switch to

“OFF” immediately after completion of the task.

Keep the mains cable away from any moving parts

or accessories.

Never cover the ventilation slots in the tool.

Danger! Read all safety regulations

and instructions.

Any errors made in following the safety

regulations and instructions may result

in an electric shock, fire and/or serious

injury. Keep all safety regulations and

instructions in a safe place for future

use.

The term “electric tool” used in the

safety instructions refers to electric tools

operated from the mains power supply

(with a power cable) and to battery

operated electric tools (without a power

cable).

Additional safety instructions

•

Always guide the power cable away from the

back of the tool.

•

Use of the tool on materials containing asbestos

is prohibited.

•

Always remove the plug from the power

supply socket before carrying out any work

on the machine (cleaning the tool, changing

accessories etc.).

•

Always disconnect the machine by removing

the plug from the socket, not by pulling on the

power cable.

•

Keep your workplace clean and well illuminated.

•

Make sure that the workpiece is sufficiently

secured so that it cannot slip.

•

Keep children away.

•

For your own sake, keep the machine clean at

all times and check it for signs of damage each

time after using it.

•

Make sure that the switch is set to OFF before

you insert the plug into the power supply socket.

•

Make sure of your footing, particularly when

working on ladders and platforms.

•

Harmful or toxic dust can be produced when

working on wood or metal.

Touching or inhaling this dust can be harmful for

the operator and other persons nearby.

•

To protect your health, always wear safety

goggles and a dust mask while operating!

•

If you discover any damage to the machine, use

the exploded diagram and the spare parts list to

determine which parts need to be ordered from

Customer Service.

•

Important! Wear safety goggles and a dust

mask.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety. Children should

be supervised to ensure that they do not play with

the appliance.

Do not lose these safety instructions.

Please check that the article is complete as

specified in the scope of delivery. If parts are

missing, please contact our service center or the

sales outlet where you made your purchase at the

latest within 5 working days after purchasing the

product and upon presentation of a valid bill of

purchase. Also, refer to the warranty table in the

service information at the end of the operating

instructions.

•

Open the packaging and take out the equipment

with care.

•

Remove the packaging material and any

packaging and/or transportation braces (if

available).

•

Check to see if all items are supplied.

•

Inspect the equipment and accessories for

transport damage.

•

If possible, please keep the packaging until the

end of the guarantee period.

Danger!

The equipment and packaging material are

not toys. Do not let children play with plastic

bags, foils or small parts. There is a danger of

swallowing or suffocating!

•

Multifunction tool

•

Plunge-cut saw blade for wood

•

Hex Key

•

Original instructions

Always use an approved extension lead suitable for

the power input of this tool. Before use, inspect the

extension lead for signs of damage, wear and ageing.

Replace the extension lead if damaged or defective.

When using an extension lead on a reel, always

unwind the lead completely. Use of an extension lead

not suitable for the power input of the tool or which is

damaged or defective may result in a risk of fire and

electric shock.

This tool is double insulated; therefore no

earth wire is required.

1. Workplace safety

a) Keep your work area clean and well

illuminated. Untidy or unlit work areas can

result in accidents.

b) Do not operate the electric tool in an

environment where there is a risk

of explosions and where there are

inflammable liquids, gases or dust. Electric

tools produce sparks which could set the dust

or vapours alight.

c) Keep the electric tool out of the reach

of children and other persons. If there is

a distraction, you may lose control of the

appliance.

4. Usage and treatment of the electric tool

a) Do not overload the appliance. Use the

correct tool for your work. You will be able

to work better and more safely within the

given performance boundaries.

b) Do not use an electric tool with a

defective switch. An electric tool that

cannot be switched on or off is dangerous

and must be repaired.

c) Pull the plug out of the socket and/or

remove the battery before making any

adjustments to the appliance, changing

accessories or put the appliance down.

This safety measure prevents starting the

electric tool unintentionally.

d) Keep unused electric tools out of the

reach of children. Do not allow people

who are not familiar with the appliance

or who have not read these instructions

to use the appliance. Electric tools are

dangerous if they are used by inexperienced

people.

e) Clean your electric tool carefully. Check

whether moving parts are functioning

properly and not jamming, whether

parts are broken or damaged enough

that the functioning of this electric

tool is affected. Have damaged parts

repaired before using the appliance. Many

accidents are caused by badly maintained

electric tools.

f) Keep your cutting tools sharp and clean.

Carefully maintained cutting tools with sharp

cutting edges will jam less and are easier to

control.

g) Make sure to use electric tools,

accessories, attachments, etc. in

accordance with these instructions.

Take the conditions in your work area

and the job in hand into account. Using

electric tools for any purpose other than the

one for which they are intended can lead to

dangerous situations.

5. Service

a) Have your electric tool repaired only by

trained personnel using only genuine

spare parts. This will ensure that your

electric tool remains safe to use.

Do not lose these safety instructions

Original Instructions

XMT-703U

Multi Function Tool

220W

Do not expose to rain

Wear eye protection

Double insulated

Volts

Hertz

Watts

Warning

Alternating current

Revolutions, reciprocations or strokes per

minute

No load speed

/min

n

o

V

Hz

W

Telephone: GB: 0151 294 4488 / IRL: 1850 882711

Before you connect the charger to the mains supply

make sure that the data on the rating plate are identical

to the mains data.

Danger! - Read the operating instructions

to reduce the risk of inquiry

Caution! Wear ear-muffs.The impact of

noise can cause damage to hearing.

Caution! Wear a breathing mask.

Dust which is injurious to health can be

generated when working on wood and other

materials. Never use the device to work on

any materials containing asbestos!

For EU countries only

Never place any electric power tools in your

household refuse.

To comply with European Directive 2012/19/EC

concerning old electric and electronic equipment

and its implementation in national laws, old

electric power tools have to be separated from

other waste and disposed of in an environment-

friendly fashion, e.g. by taking to a recycling

depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to

the manufacturer, the owner of the electrical

equipment must make sure that the equipment

is properly disposed of if p1-he no longer wants to

keep the equipment. The old equipment can be

returned to a suitable collection point that will

dispose of the equipment in accordance with the

national recycling and waste disposal regulations.

This does not apply to any accessories or aids

without electrical components supplied with the

old equipment.

Subject to technical changes

2. Electrical safety

a) The connector plug from this electric tool

must fit into the socket. The plug should

never be altered in any way. Never use

adapter plugs together with earthed

electric tools. Unaltered plugs and correct

sockets reduce the risk of an electric shock.

b) Avoid bodily contact with earthed

surfaces such as pipes, heating, ovens

and fridges. The risk of electric shock is

increased if your body is earthed.

c) Keep the tool out of the rain and away

from moisture.The ingress of water into

an electric tool increases the risk of an

electric shock.

d) Do not use the cable to carry the electric

tool, to hang it up or to pull it out of the

socket. Keep the cable away from heat,

oil, sharp edges and moving parts of the

appliance. Damaged or entangled cables

increase the risk of an electric shock.

e) If you are working outdoors with an

electric tool, only use extension cables

which are designed specifically for this

purpose. Using specially designed outdoor

extension cables, the risk of electric shock

is reduced.

f) If operation of the electric tool in a damp

environment can not be avoided, use

a earth-leakage circuit-breaker. The

earth-leakage circuit-breaker reduces the

risk of an electric shock.

3. Safety of persons

a) Be careful, watch what you are doing

and use an electric tool sensibly. Do

not use the tool if you are tired or

under the influence of drugs, alcohol or

medication. A moment of inattention when

using the electric tool can result in serious

injuries.

b) Wear personal protection equipment and

always wear safety goggles. Wearing

personal protection (such as dust masks,

non-slip safety shoes, safety helmet or ear

protection, depending upon the type and

use of the electric tool) reduces the risk of

injury.

c) Make sure that the appliance cannot

start up accidentally. Ensure that the

electric tool is switched off before you

connect it to the power supply and/or

insert the battery, or pick up or carry the

tool. If your finger is on the switch whilst

carrying the electric tool or if you connect

the appliance to the mains when it is

switched on, this can lead to accidents.

d) Remove keys and wrenches before

switching on the electric tool. A tool or

key which comes into contact with rotating

parts of the appliance can lead to injuries.

e) Avoid abnormal working postures. Make

sure you stand squarely and keep your

balance at all times. In this way, you can

control the electric tool better in unexpected

circumstances.

f) Wear suitable work clothes. Do not wear

loose clothing or jewellery. Keep hair,

clothes and gloves away from moving

parts. Loose clothing, jewellery or long hair

can get trapped in moving parts.

Do not lose this safety information.

Yang/Product-ManagementWeichselgartner/General-Manager

- 135 -

explains the following conformity according to EU directives and norms for

the following product

Multi Function Tool XMT-703U (XU1)

2014/29/EU

2005/32/EC_2009/125/EC

2014/35/EU

2006/28/EC

X

2014/30/EU

2014/32/EU

2014/53/EC

2014/68/EU

90/396/EC_2009/142/EC

89/686/EC_96/58/EC

X

2011/65/EU

X

2006/42/EC

Annex IV

Notied Body:

Notied Body No.:

Reg. No.:

2000/14/EC_2005/88/EC

Annex V

Annex VI

Noise: measured L

WA

= dB (A); guaranteed L

WA

= dB (A)

P = KW; L/Ø = cm

Notied Body:

2004/26/EC

Emission No.:

Standard references: EN 60745-1; EN 55014-1; EN 55014-2;

EN 61000-3-2; EN 61000-3-3

Landau/Isar, den 20.03.2017

First CE: 17 Archive-File/Record: NAPR016385

Art.-No.: 30.000.46 I.-No.: 11017 Documents registrar: R. Gehard

Subject to change without noticeWiesenweg 22, D-94405 Landau/Isar

ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar

EG_Erkl_XMT_703U.indd 13509.05.2017 09:16:40

Produktspezifikationen