Xvive G1 Bedienungsanleitung
Lies die bedienungsanleitung für Xvive G1 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 7.5 Bewertungen. Hast du eine Frage zu Xvive G1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
Silicone platform will not
leave marks or scratches
on instruments
Wide cradle for
enhanced guitar support
Supports almost any
electric, acoustic or bass
guitar
Perforations drastically
reduce weight and increase
portabilityNon-slip silicone base
Rugged metal
construction Stand folds for easy
storage and
transport
Four points of contact
with the oor make
the stand untippable
The G1 Buttery Guitar Stand was meticulously engineered to hold your guitar upright, safely and reliably, on-stage, in a studio or at home.
When not in use, it folds into itself, compressing into a super-compact and ultra-light accessory for easy transport and storage.
Thanks to its sturdy aluminum frame and four points of contact with the oor, the G1 oers rock-solid support for virtually any type of
electric, acoustic or bass guitar. Your instrument should be untippable—and now it can be!
Swing the “wings” of the stand around to the front, until the magnets on each side click together in the middle of the stand. Then, turn the
rear support piece (underneath the “tail” of the stand) clockwise 90 degrees to stabilize the ack of the stand. You now have an ultra-stable b
four-legged stand to support and defend your guitar!
When the “wings” of the G1 Buttery Guitar Stand are opened and folded back,
the stand becomes compact enough to store and carry in the back pocket of
your guitar bag. To close the G1, rst turn the rear support leg 90 degrees
counter-clockwise so that it’s in-line with the backside of the stand. Then, open
the wings so that the magnet in the center clicks open, and fold the two wings
back and around the “tail” of the stand.
SHENZHEN FZONE TECHNOLOGY CO., LTD.
2nd oor, Building 12, Xicheng Industrial Area, Xixiang Town,
Baoan District, Shenzhen Guangdong China. 518101
Made In China
www.xvive.com
1. Open the “wings” of the stand from the back to the front 2. The magnet in the center holds the wings together
3. Rotate the rear support piece 90 degrees clockwise 4. Setup is complete
* To collapse the stand for storage/transport, reverse the order of these instructions
Folded dimensions (W x D x H):
337 mm x 62 mm x 255 mm
Open dimensions (W x D x H):
420 mm x 325 mm x 262 mm
Weight: 796 g
Material: Aluminum alloy / Rubber
G1
BUTTERFLY
GUITAR STAND
FOLDED UP OPEN
337 mm
255 mm
62 mm
262 mm
380 mm
325 mm
260 mm
173 mm
86 mm
420 mm
85 mm
HOW TO SET UP THE STAND
TO SET UP THE STAND FROM ITS FOLDED STATE
SPECIFICATIONS
TO PREPARE THE STAND FOR STORAGE OR TRANSPORT
Magnet
Rubber is safe for most but not all
nitrocellulose lacquer nishes.
When opening or closing the G1, to avoid pinching your
ngers, do not place your ngers near the rotating shaft
(as shown in the graphic). Children should only operate
and use the stand with the guidance of an adult.
料号：111081398 G1 说明书 尺寸：148*210mm 材质：80g书纸正反双面印刷
Designed in Germany
Produktspezifikationen
| Marke: | Xvive |
| Kategorie: | Nicht kategorisiert |
| Modell: | G1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Xvive G1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Xvive
10 Juni 2025
6 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
17 August 2024
14 August 2024
11 Mai 2024
10 April 2024
Bedienungsanleitung Nicht kategorisiert
- JML
- Goki
- Sheeran Looper
- Cleco
- Tandberg Data
- Shuttle
- AL-KO
- FoxFury
- Kemo
- Bébé Confort
- V-ZUG
- AER
- PTZ Optics
- Kelvinator
- ProUser
Neueste Bedienungsanleitung für -Kategorien-
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025