Yamaha ATS-1050 Bedienungsanleitung


Seiten 2 Soundbar

Lies die Bedienungsanleitung für Yamaha ATS-1050 kostenlos online oder lade das PDF herunter. 38 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage

U
ATS-1050 Quick Start Guide
Supplied items
Before assembling and connecting, make sure you have received all of the following items.
If anything is missing, please call 888-892-6242, 8AM to 5PM PST Monday through Friday.
Placement
© 2015 Yamaha CorporationPrinted in Indonesia ZR10560
Place the sound bar in front of or below your TV, at least 50 mm
(2") away from your TV.
The sound bar may also be attached to a wall, using the
included mounting template and commercially available
screws. Refer to the Owner’s Manual for additional installation
instructions.
Set the installation position selector switch according to
the installation position of the sound bar. The sound quality
appropriate to the installation position will be set.
NOTE
•
Be careful not to stack the sound bar with any other components, as
vibration may cause system disruption in other components.
Sound bar (ATS-1050)
Mounting template
(Use when attaching the sound bar to a wall.)
Remote controlOptical cable
1.5 m (4.9 ft)
3.5 mm stereo mini plug cable
1.5 m (4.9 ft)
Owner’s Manual
Continued to the reverse side
Battery
(AAA, R03, UM4) × 2
(Install the batteries in the
remote control.)
Spacer × 2
(Use when attaching the
sound bar to a wall.)
Quick Start Guide
(This sheet)
Installation position
selector switch
(bottom panel)
On a TV cabinet, etc.Attaching to a wall
Remote control
sensor (front panel)
Remote control
sensor (top panel)
Keys
Installation position
selector switch
(bottom panel)

Bewerten Sie dieses Handbuch


Produktspezifikationen

Marke: Yamaha
Kategorie: Soundbar
Modell: ATS-1050
Unterstützte Audioformate: AAC, SBC
WLAN: Nein
Bluetooth: Ja
Bluetooth-Version: 2.1+EDR
Breite: 890 mm
Tiefe: 131 mm
Produktfarbe: Schwarz
Übertragungstechnik: Verkabelt & Kabellos
Höhe: 59 mm
RMS-Leistung: 120 W
Stromverbrauch (Standardbetrieb): 22 W
Stromverbrauch (Standby): 0.4 W
Audio Kanäle: 2.1 Kanäle
Audioeingang (L, R): 1
Digital Audio-Eingang (koaxial): 1
Eingebaute Audio-Decoder: Dolby Digital, Dolby Pro Logic II
Smartphone Fernsteuerung: Ja
Anzahl der Hochtöner-Antriebe: 2
Wandmontage: Ja
Digital-Audio-Optical-In: 1
Soundbar Lautsprecher RMS Leistung: 60 W
Gewicht Soundbar: 4000 g
Subwoofer enthalten: Ja
Subwoofer-Position: Eingebaut
Hochtönerdurchmesser: 19 mm
Subwoofer Effektivwert Energie: 60 W
Subwoofer Frequenzbereich: 55 - 160 Hz
Bass-Reflex: Ja
Treiberdurchmesser Mitteltöner: 55 mm
Anzahl der mid-range Antriebe: 2
Subwoofer Widerstand: 3 Ohm
Tieftönerdurchmesser (Subwoofer): 3 "
Hochtöner-Impedanz: 4 Ohm

Brauchst du Hilfe?

Wenn Sie Hilfe mit Yamaha ATS-1050 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten