Zebra TC58e Bedienungsanleitung


Lies die bedienungsanleitung für Zebra TC58e (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 3 Bewertungen. Hast du eine Frage zu Zebra TC58e oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions
worldwide. All other trademarks are the property of their respective owners. © 2025 Zebra Technologies Corp. and/or
its affiliates. All rights reserved. | zebra.com | ip.zebra.com
MN-005305-01EN Rev A
TC58e Custom Cup Installation Guide
This procedure provides instructions for replacing a TC58e custom cup, involving the removal of the old
cradle, swapping cables, and securing the new cup.
1. Unscrew the old cradle cup from its base using a Philips (PH02) screwdriver.
2. Lift the cup to access the inside of the cradle base.
2
4. Using tweezers, lift the sticker on top of the cable connector.
5. Remove the plastic bezel.
3
6. Disconnect the USB cable and power cable.
7. Connect the new cup USB cable to the connector on the base. Secure the cable to the base with a new
cable tie and position it under the middle frame. Connect the power cable to the connector on the base.
8. Position the plastic bezel between the cable (1) and the PCB (2).


Produktspezifikationen

Marke: Zebra
Kategorie: Nicht kategorisiert
Modell: TC58e

Brauchst du Hilfe?

Wenn Sie Hilfe mit Zebra TC58e benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten