Zempire Neo 4 Bedienungsanleitung

Lies die bedienungsanleitung für Zempire Neo 4 (2 Seiten) kostenlos online; sie gehört zur Kategorie Zelt. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Zempire Neo 4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

PITCHING INSTRUCTIONS - NEO 4

6.Pull the fly over the inner tent.

The webbing loops ORANGE

indicate the front of the fly.

Connect the velcro loops inside

the fly around the cut outs on the

corresponding pole sleeve.

5.Peg out all the peg points

around the inner tent. The

peg points at the base of

each pole should be pegged

through the webbing loop

rather than the ring.

2x

2x

4.Thread the BLUE poles through

the pole sleeve at the front and rear

of the tent. Insert the pole ends into

rings.

7. Attach the elastic loop over

the existing inner pegs. Where

there is no existing peg, peg the

fly directly into the ground

ensuring there is significant space

between the inner and fly.

8. It is recommended that guy

ropes are pegged out at all

times and windows are opened

whenever possible to allow

adequate ventilation.

Insert pegs at a 45

o

angle

3. Thread the RED poles through the

pole sleeves that run diagonally

across the centre of the tent. Insert

the ends of the poles into the pins

located below each pole sleeve.

1.Clear your site making sure there are no

sharp objects where you are going to

pitch your tent. Try to get a site that is as

flat as possible. Spread out the inner tent

(White), the round door is located

at the front.

2. Assemble the 4 pole sections.

Ensure that the poles do not

snap together.

NEO

4

NEO

4

Produktspezifikationen