Zodiac EXO Pro Bedienungsanleitung
Zodiac
Nicht kategorisiert
EXO Pro
Lies die bedienungsanleitung für Zodiac EXO Pro (32 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 31 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 16 Bewertungen. Hast du eine Frage zu Zodiac EXO Pro oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/32
eXO® | Clearwater Duo™
(all models) (all models)
H0633500_REVB
INSTALLATION MANUAL
FOR YOUR SAFETY - This product must be installed and serviced by a licensed electrician in
accordance with the latest enforced version of AS/NZ 3000 and any other applicable local installation
codes. Before installing this product, read and follow all warning notices and instructions that
accompany this product. Failure to follow warning notices and instructions may result in property
damage, personal injury, or death. Improper installation and/or operation will void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which can cause serious
injury, property damage, or death.
WARNING
Page 2 Clearwater Duo™, eXO® | Installation Manual
Refer to the following websites for information on warranty and service in your country:
• Australia,NZ,AsiaandSthPacicgotowww.zodiac.com.au
• South Africa go to www.zodiac.co.za
DATE OF INSTALLATION
INSTALLER INFORMATION
INITIAL PRESSURE GAUGE READING (WITH CLEAN FILTER)
PUMP MODEL HORSEPOWER
FILTER MODEL
CONTROL PANEL MODEL SERIAL NUMBER
NOTES:
EQUIPMENT INFORMATION RECORD
Page 3
Clearwater Duo™, eXO® | Installation Manual
Table of Contents
Section 1. Important Safety Instructions 4 .......
Section 2. System Overview 6 ...........................
2.1 Contents ........................................................................ 6
2.2 Specifications ................................................................6
2.3 Dimensions....................................................................7
2.4 Materials and Tools .......................................................7
Section 3. Plumbing......................................... 8
Section 4. Install Controller 9 ............................
4.1 Mount the Bracket 9 .........................................................
4.2 Install temperature sensor 9 .............................................
4.3 Electrical Connections 9 ...................................................
Section 5. Install the pH Link or Dual Link
Module on the Controller ............ 11
5.1 Install the POD Kit ....................................................... 11
5.2 Drill the Pipe ................................................................ 11
5.3 Install the POD ............................................................ 11
5.4 Install the POD Cap.....................................................12
5.5 Install and Calibrate
the Sensor(s) 12 ...............................................................
5.6 Install the pH Down Intake and Injection lines.............13
5.7 Calibration Procedure..................................................14
Section 6. Prepare and Balance the Pool 15 ....
6.1 pH Regulation Principle 15 ...............................................
6.2 Water Chemistry Table ................................................ 15
6.3 Stabilizer (Cyanuric Acid) ............................................15
Section 7. Operation 16 ......................................
7.1 User Interface Overview 16 ..............................................
7.2 Initial start-Up 16 ..............................................................
Section 8. Installing and
Assigning Equipment 18 ..................
8.1 Filter Pump 18 ..................................................................
8.2 Aux/Lights....................................................................19
8.3 Heating ........................................................................ 21
Section 9. Calibration and Priming 22 ..............
9.1 pH Sensor Calibration 22 .................................................
9.2 ORP Sensor Calibration 22 .............................................
9.3 Setpoint(s) ................................................................... 22
9.4 Prime and Test the pH Dosing Pump 23 ..........................
9.5 Programming/Timers ................................................... 23
9.6 Reversing ....................................................................25
9.7 Slave Mode 25 .................................................................
Section 10. Pairing and
Connecting to Wi-Fi 26 .....................
10.1 Wi-Fi Direct Mode 26 ........................................................
10.2 Invitation Code 26 ............................................................
10.3 Frequently Asked Wi-Fi Connection Questions (FAQs) 26
Section 11. Help Menu 27 .....................................
Section 12. Inspecting and
Cleaning the Electrode 28 ................
Section 13. Winterizing 28 ....................................
13.1 Winterize the pH/ORP Sensors 28 ...................................
13.2 Reopening the Pool 28 .....................................................
Section 14. Troubleshooting 29 ...........................
Produktspezifikationen
| Marke: | Zodiac |
| Kategorie: | Nicht kategorisiert |
| Modell: | EXO Pro |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Zodiac EXO Pro benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Zodiac
9 Juni 2025
9 Juni 2025
8 Juni 2025
8 Juni 2025
6 Juni 2025
6 Juni 2025
31 August 2024
31 August 2024
12 August 2024
7 August 2024
Bedienungsanleitung Nicht kategorisiert
- KeepOut
- Irritrol
- Power Dynamics
- Speed-Link
- Lingg & Janke
- RGBlink
- Vorago
- Canon
- Edouard Rousseau
- Beringer
- Mobli
- BIOS Medical
- Carcomm
- Hatco
- Deltex
Neueste Bedienungsanleitung für -Kategorien-
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025